首页> 外文会议>Electron Devices and Solid-State Circuits, 2005 IEEE Conference on >Fabrication of Optical Waveguide using Silicon Oxynitride Prepared by Thermal Oxidation of Silicon Rich Silicon Nitride
【24h】

Fabrication of Optical Waveguide using Silicon Oxynitride Prepared by Thermal Oxidation of Silicon Rich Silicon Nitride

机译:用热氧化富硅氮化硅制备的氮氧化硅制备光波导

获取原文

摘要

This work reports a method for reducing hydrogen content in silicon oxynitride film for integrated optical applications. The silicon oxynitride (SiON) films were grown by plasma enhanced chemical vapor deposition (PECVD) with N2O, NH3and SiH4as precursor gases. Using higher flow rate of SiH4and NH3, Si-rich oxynitride films with high refractive index were obtained. Detailed ellipsometry and Fourier transform infrared (FTIR) spectroscopy characterization of the as-deposited samples and samples with thermal oxidation/annealing were conducted. Results showed that the silicon oxynitride deposited with gas flow rates of NH3/N2O/SiH4=20/500/20 (sccm) has favorable properties for integrated waveguide applications. The refractive index of this layer is about 1.57 at 632.8 nm wavelength and the layer has a comparative low density of N-H bonds. With a high temperature annealing treatment in oxygen ambient, the hydrogen content in the as-deposited SiON film was reduced by 87% as results of excess silicon oxidation and hydrogen bond removal.
机译:这项工作报告了一种用于集成光学应用的降低氮氧化硅膜中氢含量的方法。通过等离子增强化学气相沉积(PECVD)以N 2 O,NH 3 和SiH 4 作为等离子体生长氮氧化硅(SiON)膜前体气体。使用较高流速的SiH 4 和NH 3 ,可获得具有高折射率的富Si氧氮化物膜。进行了详细的椭偏和傅里叶变换红外(FTIR)光谱表征,对沉积后的样品和进行热氧化/退火的样品进行了表征。结果表明,以NH 3 / N 2 O / SiH 4 = 20/500/20(sccm )具有集成波导应用的良好特性。该层在632.8nm波长处的折射率约为1.57,并且该层具有比较低的N-H键密度。通过在氧气环境中进行高温退火处理,由于过度的硅氧化和氢键去除,沉积的SiON膜中的氢含量降低了87%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号