首页> 外文会议>International Conference on Robotics and Automation >A bio-robotic remora disc with attachment and detachment capabilities for reversible underwater hitchhiking
【24h】

A bio-robotic remora disc with attachment and detachment capabilities for reversible underwater hitchhiking

机译:具有附着和分离功能的可逆水下搭便车的生物机器人re病盘

获取原文

摘要

Remoras employ their adhesive discs to rapidly attach to and detach from a wide range of marine surfaces. By analyzing high-speed images of remoras' (Echeneis naucrates) hitchhiking behavior, we describe the fish's detachment mechanism as a lip curling up to break the seal between the disc and substrate. By mimicking the kinematic and morphological properties of the biological disc, we fabricated a multi-material biomimetic disc (whose stiffness spans four orders of magnitude) that is capable of both attachment and detachment. Detachment is realized by a flexible cable-driven mechanism that curls the anterior region of the silicone soft lip, allows leakage under the disc, and equalizes the internal pressure to the external pressure. The disc lamellae with attached carbon fiber spinules can be rotated by hydraulic soft actuators whose internal pressure is precisely tuned to the ambient underwater pressure. During attachment, increasing the rotational angle of the lamellae and the preload of the disc significantly enhanced the adhesive forces. We found that curling up the soft lip and folding down the lamellae rapidly reduced the pulling force of the disc by a factor of 254 compared to that under the attached state, which lead to detachment. Based on these mechanisms, underwater maneuvers involving repeated attachment and detachment were demonstrated with an integrated ROV unit that had a self-contained actuation and control system for the disc. This study lays a foundation for the development of fully untethered robotic systems for underwater hitchhiking in real-world marine environments.
机译:Remoras利用其粘性圆盘将其快速贴在各种海洋表面上,并与之分离。通过分析re鱼(Echeneis naucrates)搭便车行为的高速图像,我们将鱼的分离机制描述为翘起的嘴唇,以破坏圆盘和基底之间的密封。通过模仿生物椎间盘的运动学和形态学特性,我们制造了一种能够附着和分离的多材料仿生椎间盘(其硬度跨度为四个数量级)。拆卸是通过一种柔性的电缆驱动机构实现的,该机构使硅胶软唇的前部区域卷曲,允许椎间盘下漏出,并使内部压力与外部压力相等。带有碳纤维尖刺的盘状薄片可以通过液压软致动器旋转,其内部压力精确地调节到水下环境压力。在附接期间,增加薄片的旋转角度和盘的预紧力显着增强了粘合力。我们发现,卷曲的软唇和向下折叠的薄片会比在附着状态下将圆盘的拉力迅速减小254倍,从而导致分离。基于这些机制,使用集成的ROV单元演示了涉及重复连接和拆卸的水下操纵,该集成的ROV单元具有独立的光盘驱动和控制系统。该研究为开发用于现实世界海洋环境中的水下搭便车的完全不受束缚的机器人系统奠定了基础。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号