首页> 外文会议>IEEE International Conference on Electrical Engineering and Photonics >Influence of Guard Intervals Length on Detection of Long Pulse Signals
【24h】

Influence of Guard Intervals Length on Detection of Long Pulse Signals

机译:保护间隔长度对长脉冲信号检测的影响

获取原文

摘要

Problems of pulse detection with unknown parameters are discussed. Detection of long pulse signals if the pulse duration exceeds duration of the detector sliding windows is considered. A widely used adaptive detector with sliding windows, known as cell averaging constant false alarm rate (CA-CFAR) detector, is investigated in detail. It is shown, that the use of long guard intervals between the analyzed sample and the sliding windows helps to significantly increase the probability of correct detection of long pulse signals. It is also shown that the use of different lengths of these guard intervals helps to increase the probability of correct detection of pulse trains in comparison with the use of identical interval lengths. The results are not limited to CA-CFAR detectors since many other types of adaptive detectors using sliding windows for noise level estimation suffer from similar problems.
机译:讨论了参数未知的脉冲检测问题。如果脉冲持续时间超过检测器滑动窗口的持续时间,则考虑检测长脉冲信号。详细研究了一种广泛使用的带有滑动窗口的自适应检测器,称为信元平均恒定虚警率(CA-CFAR)检测器。结果表明,在分析样品和滑动窗口之间使用较长的保护间隔有助于显着增加正确检测长脉冲信号的可能性。还显示出,与使用相同的间隔长度相比,使用这些保护间隔的不同长度有助于提高正确检测脉冲序列的可能性。结果不限于CA-CFAR检测器,因为使用滑动窗口进行噪声水平估计的许多其他类型的自适应检测器也存在类似的问题。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号