首页> 外文会议>Emerging Lithographic Technologies X pt.1 >Phase Defect Observation Using an EUV Microscope
【24h】

Phase Defect Observation Using an EUV Microscope

机译:使用EUV显微镜观察相缺陷

获取原文
获取原文并翻译 | 示例

摘要

We constructed the EUV microscope (EUVM) for actinic mask inspection which consists of Schwarzschild optics (NA0.3, 30X) and X-ray zooming tube. Using this system, EUVL finished mask and Mo/Si glass substrates are inspected. EUVM image of 250 nm width pattern on 6025 Grass mask was clealy observed. Resolution can be estimated to be 50 nm or less from this pattern. The programmed phase defect on the glass substrate is also used for inspection. By using EUV microscope, programmed phase defect with a width of 90 nm, 100 nm, 110 nm, a bump of 5 nm and a length of 400 μm can be observed finely. And the programmed phase defect of 100 nm-wide and 2 nm pit was also observed. Moreover, a programmed defect with a width of 500 nm is observed as two lines. This is because phase change produced with the edge of both sides of a programmed defect. Thus, in this research, observation of a program phase defect was advanced using the EUV microscope, and it succeeded in observation of the topological defect image inside a multilayer film. These results show that it is possible to catch internal reflectance distribution of multilayer under the EUV microscope, without being dependent on surface figure.
机译:我们构造了用于光化面罩检查的EUV显微镜(EUVM),该显微镜由Schwarzschild光学元件(NA0.3、30X)和X射线变焦管组成。使用该系统,检查EUVL成品掩模和Mo / Si玻璃基板。清晰地观察到在6025草掩膜上的250 nm宽度图案的EUVM图像。根据该图案,分辨率可以估计为50nm或更小。玻璃基板上已编程的相位缺陷也用于检查。通过使用EUV显微镜,可以精细地观察到具有90nm,100nm,110nm的宽度,5nm的凸块和400μm的长度的编程相位缺陷。并且还观察到了100 nm宽和2 nm凹坑的编程相位缺陷。此外,观察到两条线的宽度为500 nm的编程缺陷。这是因为在编程缺陷两侧的边缘都产生了相变。因此,在本研究中,使用EUV显微镜提高了对程序阶段缺陷的观察,并且成功地观察了多层膜内部的拓扑缺陷图像。这些结果表明,可以在不依赖于表面图形的情况下在EUV显微镜下捕获多层的内部反射率分布。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号