首页> 外文会议>Advanced sensor systems and applications VI >A new refractive index sensor based on Mach-Zehnder interferometer fabricated by two cascaded single-mode fiber corners
【24h】

A new refractive index sensor based on Mach-Zehnder interferometer fabricated by two cascaded single-mode fiber corners

机译:基于马赫曾德尔干涉仪的新型折射率传感器,该传感器由两个级联的单模光纤角构成

获取原文
获取原文并翻译 | 示例

摘要

We reported two kinds of fiber sensor based on double cascaded single mode fiber corners, which has a high sensitivity for refractive index (RI) sensing. RI sensing was experimentally demonstrated with average sensitivity of 95.5nm/RI unit (RIU) in a RI range from 1.333 to 1.421 and the other is 235nm/RI unit (RIU) from 1.333 to 1.418, which are relatively high among the previously reported similar fiber sensors (e.g., it is about 10 times higher than that of the normal two or three-cascaded-taper based Mach-Zehnder interferometer). Besides, The proposed RI sensors were fabricated only by a fiber fusion splicer. So , the fiber sensor is quite easy to made.
机译:我们报告了两种基于双级联单模光纤角的光纤传感器,它们对折射率(RI)的检测具有很高的灵敏度。实验证明了RI感应的平均灵敏度为95.5nm / RI单位(RIU),RI范围为1.333至1.421,另一个为235nm / RI单位(RIU),灵敏度为1.333至1.418,在先前报道的同类产品中相对较高光纤传感器(例如,它比普通的基于两级或三级锥形的Mach-Zehnder干涉仪的传感器高约10倍)。此外,所提出的RI传感器仅由光纤熔接机制造。因此,光纤传感器很容易制造。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号