首页> 外文会议>2010 International Symposium on VLSI Design Automation and Test >An 8-bit LCD source driver with push- pull low-power output buffer amplifiers
【24h】

An 8-bit LCD source driver with push- pull low-power output buffer amplifiers

机译:具有推挽式低功耗输出缓冲放大器的8位LCD源驱动器

获取原文
获取原文并翻译 | 示例

摘要

An 8-bit LCD source driver with push-pull buffer amplifiers for N-dot inversion driving is presented. The proposed push-pull output buffer amplifier with dynamic bias effectively increases the transient response, reducing the transistor count of the bias circuit and decreasing the quiescent current path. An 8-bit source driver supporting an N-dot inversion driving scheme is implemented using 0.35µm CMOS technology. The developed driver has maximum setting times of 1.4µs and 1.2µs for rising and falling edges, respectively, under one-dot inversion with a 680pF load. The quiescent current consumption of the proposed push-pull buffer amplifier is about 3.8µA.
机译:提出了一种具有推挽缓冲放大器的8位LCD源驱动器,用于N点反转驱动。所提出的具有动态偏置的推挽输出缓冲放大器有效地增加了瞬态响应,减少了偏置电路的晶体管数量,并减少了静态电流路径。使用0.35µm CMOS技术实现了支持N点反转驱动方案的8位源极驱动器。在680pF负载的单点反转下,开发的驱动器在上升沿和下降沿的最大设置时间分别为1.4µs和1.2µs。拟议的推挽缓冲放大器的静态电流消耗约为3.8µA。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号