GRAVITATIONAL FORCE DRIVEN PRIME MOVER SUPPLEMENTED WITH SELF ACTIVITED ACCELERATION AND REGULATED PRESSURISED WATER JET THIGARI-T-2 METHODOLOGY TO GENERATE POWER

摘要

The system is devised to generate electricity by utilising freely available gravitational fore and self activated acceleration system with inbuilt facility of the conduits laid with spherical shells erected on the drum of the flywheel at specified angle in all the three compartments of giant flywheel manufactured out of 4 Nos. of MS. Annular rings. The wire rope is wound on the drum of the flywheel, with inner end hung to the peg and other end tied to the trolley carrying mass placed on a track laden ramp. When the trolley is allowed to run on the track and the wire rope is fully unwound, the pull in the wire rope makes the flywheel to rotate at the angular velocity a) is reached. The mass of flywheel and trolley carrying, mass are so designed to achieve this and torque is generated by the flywheel and same is transferred to the alternator through the fluid coupling, gear train, and step up gearbox. When the flywheel commences rotation the conduit in the forward position turns one or two degrees below the horizontal plane. The spherical shell rolls from hub end to periphery and vice versa in the opposite, and the force generated due to the couple formed out of these rolling spherical shells is transferred to rotating fly wheel as an accelerating force. Similarly if the velocity tends to decrease either due to friction or load, the pressurised water stored in the hydraulic accumulator, established at the toe of the ramp is used to strike a controlled jet on the vanes wielded over the periphery of the flywheel, this additional force also acts as an accelerating force, and assists to run the flywheel at constant velocity and consistency. Thus the electricity is generated by utilising gravitational force.