首页> 外文OA文献 >Development of 394.6 GHz CW Gyrotron (Gyrotron FU CW II) for DNP/Proton-NMR at 600 MHz
【2h】

Development of 394.6 GHz CW Gyrotron (Gyrotron FU CW II) for DNP/Proton-NMR at 600 MHz

机译:在600 mHz下开发用于DNp /质子核磁共振的394.6 GHz CW回旋管(回旋管FU CW II)

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Gyrotron FU CW II with an 8 T liquid He free superconducting magnet, the second gyrotron of the THz Gyrotron FU CW Series, has been constructed and the operation test was successfully carried out. It will be used for enhancing the sensitivity of 600 MHz proton-NMR by use of Dynamic Nuclear Polarization (DNP). The designed operation mode of the gyrotron is TE2,6 at the second harmonic. The corresponding frequency is 394.6 GHz. The real operation frequency is 394.3 GHz at TE06 mode, because of fabrication error of the diameter of the cavity. The operation is in complete CW at the output power of around 30 W or higher at the TE06 cavity mode. There are many other operation modes at the fundamental and the second harmonic. Typical output power of the fundamental and the second harmonic are higher than 100 W and 20 W, respectively. The highest frequency observed up to the present is 443.5 GHz at the second harmonic operation of TE6,5 mode. The measured results are compared with the theoretical consideration.
机译:构造了带有8 T液态He无液超导磁体的Gyrotron FU CW II,它是THz Gyrotron FU CW系列的第二个回旋管,并成功进行了运行测试。通过使用动态核极化(DNP),它将用于增强600 MHz质子NMR的灵敏度。回旋管的设计运行模式为二次谐波为TE2,6。对应的频率是394.6 GHz。由于腔直径的制造误差,在TE06模式下,实际工作频率为394.3 GHz。在TE06腔模式下,工作在完全CW下,输出功率约为30 W或更高。在基波和二次谐波处还有许多其他工作模式。基波和二次谐波的典型输出功率分别高于100 W和20W。在TE6,5模式的二次谐波运行中,迄今为止观察到的最高频率为443.5 GHz。将测量结果与理论考虑进行比较。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号