首页> 外文OA文献 >Temperature-Regulated Formation of Mycelial Mat-Like Biofilms by Legionella pneumophila
【2h】

Temperature-Regulated Formation of Mycelial Mat-Like Biofilms by Legionella pneumophila

机译:嗜肺军团菌对菌丝状类似生物膜的温度调节形成

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Fifty strains representing 38 species of the genus Legionella were examined for biofilm formation on glass, polystyrene, and polypropylene surfaces in static cultures at 25°C, 37°C, and 42°C. Strains of Legionella pneumophila, the most common causative agent of Legionnaires' disease, were found to have the highest ability to form biofilms among the test strains. The quantity, rate of formation, and adherence stability of L. pneumophila biofilms showed considerable dependence on both temperature and surface material. Glass and polystyrene surfaces gave between two- to sevenfold-higher yields of biofilms at 37°C or 42°C than at 25°C; conversely, polypropylene surface had between 2 to 16 times higher yields at 25°C than at 37°C or 42°C. On glass surfaces, the biofilms were formed faster but attached less stably at 37°C or 42°C than at 25°C. Both scanning electron microscopy and confocal laser scanning microscopy revealed that biofilms formed at 37°C or 42°C were mycelial mat like and were composed of filamentous cells, while at 25°C, cells were rod shaped. Planktonic cells outside of biofilms or in shaken liquid cultures were rod shaped. Notably, the filamentous cells were found to be multinucleate and lacking septa, but a recA null mutant of L. pneumophila was unaffected in its temperature-regulated filamentation within biofilms. Our data also showed that filamentous cells were able to rapidly give rise to a large number of short rods in a fresh liquid culture at 37°C. The possibility of this biofilm to represent a novel strategy by L. pneumophila to compete for proliferation among the environmental microbiota is discussed.
机译:在25℃,37℃和42℃的静态培养物中,检查了代表38种军团菌的50个菌株在玻璃,聚苯乙烯和聚丙烯表面上的生物膜形成。在测试菌株中,军团菌病最常见的病原体是嗜肺军团菌菌株,它们形成生物膜的能力最高。嗜肺乳杆菌生物膜的数量,形成速率和粘附稳定性显示出对温度和表面材料的显着依赖性。玻璃和聚苯乙烯表面在37°C或42°C下的生物膜收率比25°C高2到7倍;相反,聚丙烯表面在25°C下的产率比在37°C或42°C时高2至16倍。在玻璃表面上,生物膜形成的速度更快,但在37°C或42°C下的附着力比在25°C下不稳定。扫描电子显微镜和共聚焦激光扫描显微镜均显示,在37°C或42°C形成的生物膜呈菌丝体状并由丝状细胞组成,而在25°C时,细胞呈棒状。生物膜外部或摇动的液体培养物中的浮游细胞呈棒状。值得注意的是,发现丝状细胞是多核的并且没有隔片,但是嗜肺乳杆菌的recA无效突变体在生物膜内的温度调节丝化中不受影响。我们的数据还显示,在37°C的新鲜液体培养物中,丝状细胞能够迅速产生大量短杆。讨论了这种生物膜代表嗜肺乳杆菌(L. pneumophila)竞争环境微生物群中增殖的新策略的可能性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号