首页> 外文OA文献 >Unsteady Flow in a Supersonic Turbine with Variable Specific Heats
【2h】

Unsteady Flow in a Supersonic Turbine with Variable Specific Heats

机译:具有可变比热的超音速涡轮机中的非定常流动

摘要

Modern high-work turbines can be compact, transonic, supersonic, counter-rotating, or use a dense drive gas. The vast majority of modern rocket turbine designs fall into these Categories. These turbines usually have large temperature variations across a given stage, and are characterized by large amounts of flow unsteadiness. The flow unsteadiness can have a major impact on the turbine performance and durability. For example, the Space Transportation Main Engine (STME) fuel turbine, a high work, transonic design, was found to have an unsteady inter-row shock which reduced efficiency by 2 points and increased dynamic loading by 24 percent. The Revolutionary Reusable Technology Turbopump (RRTT), which uses full flow oxygen for its drive gas, was found to shed vortices with such energy as to raise serious blade durability concerns. In both cases, the sources of the problems were uncovered (before turbopump testing) with the application of validated, unsteady computational fluid dynamics (CFD) to the designs. In the case of the RRTT and the Alternate Turbopump Development (ATD) turbines, the unsteady CFD codes have been used not just to identify problems, but to guide designs which mitigate problems due to unsteadiness. Using unsteady flow analyses as a part of the design process has led to turbine designs with higher performance (which affects temperature and mass flow rate) and fewer dynamics problems. One of the many assumptions made during the design and analysis of supersonic turbine stages is that the values of the specific heats are constant. In some analyses the value is based on an average of the expected upstream and downstream temperatures. In stages where the temperature can vary by 300 to 500 K, however, the assumption of constant fluid properties may lead to erroneous performance and durability predictions. In this study the suitability of assuming constant specific heats has been investigated by performing three-dimensional unsteady Navier-Stokes simulations for a supersonic turbine stage.
机译:现代的高功率涡轮机可以是紧凑的,跨音速的,超音速的,反向旋转的,也可以使用密集的驱动气体。绝大多数现代火箭涡轮设计都属于这些类别。这些涡轮机通常在给定的阶段具有较大的温度变化,并且特征在于大量的流动不稳定。流动不稳定会对涡轮机的性能和耐用性产生重大影响。例如,发现太空运输主引擎(STME)燃料涡轮机是一种高功跨音速设计,具有不稳定的行间冲击,可将效率降低2个点并将动态负载增加24%。革命性可重复使用技术涡轮泵(RRTT)使用全流氧气作为驱动气体,发现它会散发出涡流,从而引起严重的叶片耐用性问题。在这两种情况下,都通过在设计中应用经过验证的非稳态计算流体动力学(CFD)来发现问题的根源(在涡轮泵测试之前)。就RRTT和备用涡轮泵开发(ATD)涡轮机而言,不稳定的CFD代码不仅用于识别问题,而且还用于指导减轻不稳定性问题的设计。在设计过程中使用非恒定流分析已导致涡轮机设计具有更高的性能(影响温度和质量流率),并且动力学问题更少。在超音速涡轮机级的设计和分析过程中做出的许多假设之一是,比热的值是恒定的。在某些分析中,该值基于预期的上游和下游温度的平均值。但是,在温度可以变化300到500 K的阶段中,恒定流体属性的假设可能会导致错误的性能和耐用性预测。在这项研究中,通过对超音速涡轮机级执行三维非稳态Navier-Stokes模拟,研究了假设比热恒定的适用性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号