Impact on thermomechanical behaviour of a maleic anhydride grafted ABS on ABS/PC multi-layered blends

摘要

The significant increase of Waste Electric and Electronic Equipment (WEEE) has led to an important research in upgrading recycled engineering plastics by means of a blending technique. In particular, there is an interest in studying the properties of ABS/PC blends, the two most important components of WEEE, at ABS rich compositions, according to the generation ratio of waste [1]. Since ABS and PC are immiscible, the final properties depend to a large extent on the flow-induced morphology [2]. In order to better control the final blend morphology of injection molded samples, we propose a two-step approach: the first step consists in producing pellets with multilayered structure, using a multilayer coextrusion device. During the second subsequent step, the pellets are injection molded, with temperature conditions chosen to minimize the deformation of the created structures. The effect of a compatibilizer, namely, an ABS grafted with maleic anhydride (ABS-g-MA) [3] on the thermomechanical properties and morphology has been investigated.