A comparative study of anti-stripping additives in porous asphalt mixtures

摘要

Presence of water in porous asphalt mixtures detrimentally affected the bonding between binder-aggregate interface and cohesive failure within the binder-filler mastic, making them prone to stripping which contribute to the performance and durability. This paper presents the effect of anti-stripping additives in porous asphalt mixes. In this study, the Marshall specimens were prepared using quarry dust, ordinary Portland Cement (OPC) and Pavement Modifier (PMD) as filler then mixed with 60/70 penetration grade bitumen. The specimens were measured for air voids content and coefficient of permeability and subsequently tested using indirect tensile and Cantabro tests. The moisture sensitivity of porous asphalt was determined based on the ratio of dry and conditioned specimens according to AASHTO T283. The specimens prepared with PMD showed lower air voids content, hence decrease the permeability to give a higher tensile strength and lower abrasion loss compared to specimens prepared with OPC and quarry dust. Based on the results, the PMD filler has a great potential to improve resistance to moisture damage compared to mixes with OPC and specimens prepared with quarry dust fillers.