首页> 外文OA文献 >Mapping radiation interception in row-structured orchards using 3D simulation and high-resolution airborne imagery acquired from a UAV
【2h】

Mapping radiation interception in row-structured orchards using 3D simulation and high-resolution airborne imagery acquired from a UAV

机译:使用3D模拟和从无人机获取的高分辨率机载图像绘制行状果园中的辐射拦截图

摘要

This study was conducted to model the fraction of intercepted photosynthetically active radiation (fIPAR) in heterogeneous row-structured orchards, and to develop methodologies for accurate mapping of the instantaneous fIPAR at field scale using remote sensing imagery. The generation of high-resolution maps delineating the spatial variation of the radiation interception is critical for precision agriculture purposes such as adjusting management actions and harvesting in homogeneous within-field areas. Scaling-up and model inversion methods were investigated to estimate fIPAR using the 3D radiative transfer model, Forest Light Interaction Model (FLIGHT). The model was tested against airborne and field measurements of canopy reflectance and fIPAR acquired on two commercial peach and citrus orchards, where study plots showing a gradient in the canopy structure were selected. High-resolution airborne multi-spectral imagery was acquired at 10 nm bandwidth and 150 mm spatial resolution using a miniaturized multi-spectral camera on board an unmanned aerial vehicle (UAV). In addition, simulations of the land surface bidirectional reflectance were conducted to understand the relationships between canopy architecture and fIPAR. Input parameters used for the canopy model, such as the leaf and soil optical properties, canopy architecture, and sun geometry were studied in order to assess the effect of these inputs on canopy reflectance, vegetation indices and fIPAR. The 3D canopy model approach used to simulate the discontinuous row-tree canopies yielded spectral RMSE values below 0. 03 (visible region) and below 0. 05 (near-infrared) when compared against airborne canopy reflectance imagery acquired over the sites under study. The FLIGHT model assessment conducted for fIPAR estimation against field measurements yielded RMSE values below 0. 08. The simulations conducted suggested the usefulness of these modeling methods in heterogeneous row-structured orchards, and the high sensitivity of the normalized difference vegetation index and fIPAR to background, row orientation, percentage cover and sun geometry. Mapping fIPAR from high-resolution airborne imagery through scaling-up and model inversion methods conducted with the 3D model yielded RMSE error values below 0. 09 for the scaling-up approach, and below 0. 10 for the model inversion conducted with a look-up table. The generation of intercepted radiation maps in row-structured tree orchards is demonstrated to be feasible using a miniaturized multi-spectral camera on board UAV platforms for precision agriculture purposes. © 2012 Springer Science+Business Media, LLC.
机译:进行这项研究以模拟异质行结构果园中截获的光合有效辐射(fIPAR)的比例,并开发使用遥感影像在野外尺度上准确绘制瞬时fIPAR的方法。描绘辐射截留空间变化的高分辨率地图的生成对于精确农业目的至关重要,例如调整管理措施和在均匀的田间区域内进行收割。研究了使用3D辐射传递模型,森林光相互作用模型(FLIGHT)的放大和模型反演方法来估计fIPAR。该模型针对在两个商业桃园和柑桔园获取的冠层反射率和fIPAR进行了空中测量和野外测量,并选择了显示冠层结构梯度的研究区。在无人飞行器(UAV)上使用微型化多光谱相机在10 nm带宽和150 mm空间分辨率下获取了高分辨率的机载多光谱图像。此外,还进行了陆地表面双向反射率的模拟,以了解冠层结构与fIPAR之间的关系。为了评估这些输入对冠层反射率,植被指数和fIPAR的影响,研究了用于冠层模型的输入参数,例如叶片和土壤的光学特性,冠层结构和太阳几何形状。与在研究地点采集的机载机盖反射图像相比,用于模拟不连续行树机盖的3D机盖模型方法产生的光谱RMSE值低于0. 03(可见区域)和低于0. 05(近红外)。针对实地测量的fIPAR估算进行的FLIGHT模型评估得出的RMSE值低于0。08.进行的仿真表明,这些建模方法在异质行状果园中非常有用,并且归一化差异植被指数和fIPAR对背景具有很高的敏感性,行方向,覆盖百分比和太阳几何。通过3D模型进行的放大和模型反演方法从高分辨率机载图像中映射fIPAR,对于放大方法,RMSE误差值小于0. 09,对于通过模型进行的模型反演,RMSE误差值小于0. 10。桌子。使用微型无人机平台上的微型多光谱摄像头在行列树型果园中截获辐射图的生成被证明是可行的,用于精确农业目的。 ©2012 Springer Science + Business Media,LLC。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号