首页> 外文OA文献 >Setting Mechanical Properties of High Strength Steels for Rapid Hot Forming Processes

【2h】

Setting Mechanical Properties of High Strength Steels for Rapid Hot Forming Processes

机译：快速热成型工艺设定高强度钢的机械性能

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Christian Löbbe; Oliver Hering; Lars Hiegemann; A. Tekkaya;
展开▼
作者单位

展开▼
年度 2016
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Setting Mechanical Properties of High Strength Steels for Rapid Hot Forming Processes [J] . Christian L?bbe, Oliver Hering, Lars Hiegemann, Materials . 2016,第4期

机译：设定快速热成型过程中高强度钢的机械性能
2. Effects of rapid conductive heating and passive cooling with cold dies on hot-forming formability and final mechanical properties of boron steel sheets [J] . O Kocar, H Livatyali Proceedings of the Institution of Mechanical Engineers. Part L, Journal of Materials: Design and Application . 2021,第2期

机译：快速导电加热和无源冷却与冷模对硼钢板的热成形成形性和最终机械性能的影响
3. Influence of surface oxide on mechanical properties of laser-welded hot-press-forming steel with strength of 1.8 GPa [J] . Kang Minjung, Kim Cheolhee Journal of Laser Applications . 2018,第3期

机译：表面氧化物对强度为1.8 GPa的激光焊接热压成型钢的力学性能的影响
4. INFLUENCE OF SURFACE OXIDE ON MECHANICAL PROPERTIES OF LASER-WELDED HOT-PRESS-FORMING STEEL WITH STRENGTH OF 1.8 GPa [C] . Minjung Kang, Cheolhee Kim International Congress on Applications of Lasers Electro-Optics . 2017

机译：表面氧化物对激光焊接热压成形钢力学性能的影响，强度为1.8GPa
5. Streamlining Alloy Design and Thermo-mechanical Processing Parameters for High Strength Line Pipe Steels and Hot Rolled Microalloyed Steels: Process - Structure - Property Paradigm [D] . Natarajan, Venkata Vignesh. 2018

机译：高强度管线钢和热轧微合金钢的流线型合金设计和热机械加工参数：工艺-结构-性能范式
6. Setting Mechanical Properties of High Strength Steels for Rapid Hot Forming Processes [O] . Christian Löbbe, Oliver Hering, Lars Hiegemann, 2016

机译：设定快速热成型过程中高强度钢的机械性能
7. Mechanical properties of various concrete after high temperature exposure Mechanical property of various types of concrete after high temperature exposure is investigated. Considering compressive strength requirement for a vertical element in high rise building, concrete specimens with various design strengths of 35, 80, 100, and 150 MPa were tested. Particularly, the influence of incorporated steel fiber on fire resistance is of interest in this study. Experimental results show that the fire resistance depends on the design strength and steel fiber content. Normal strength concrete (NSC) of a design strength of 35 MPa or high performance concrete (HPC) of 80-100 MPa does not spall when exposed to 100-400 °C of temperature. However, an explosive spalling occurs at 300 °C when the HPCs contain 1 vol. of steel fiber. Ultra-high performance concrete (UHPC) of a design strength of 150 MPa and 1.5 vol. of steel fiber also shows dramatic spalling at 300 °C. The experimental results found in this study can contribute to a better understanding of the behaviors of HPC and UHPC under fire and the role of steel fiber on the fire resistance. [O] . 2017

机译：研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求，测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是，在这项研究中，掺入钢纤维对耐火性的影响。实验结果表明，耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时，80-100MPa的设计强度为35MPa或高性能混凝土（HPC）的正常强度混凝土（NSC）不会击落。然而，当HPC含有1体积的钢纤维的百分比时，爆炸性剥落发生在300℃。超高性能混凝土（UHPC）的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。

Setting Mechanical Properties of High Strength Steels for Rapid Hot Forming Processes

著录项

引文网络

相似文献

相关主题

期刊订阅