首页> 外文OA文献 >Feasibility study of fuel reactor to produce synthetic gas as an alternative energy
【2h】

Feasibility study of fuel reactor to produce synthetic gas as an alternative energy

机译:燃料反应堆生产合成气替代能源的可行性研究

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

This research is focused on the feasibility of the Fuel Reactor in order to produce synthetic gas. The Fuel Reactor uses ordinary tap water and low voltage electrical energy for producing a synthetic gas. High temperature (3000-4000°C) plasma is generated underwater by an electrical arc between carbon electrodes. The FueludReactor produces a mixture of carbon monoxide and hydrogen (COH 2) and this gas can burn very cleanly in oxygen or air. The objective of this research is to produce the Fuel Reactor and to test the feasibility of the Fuel Reactor to produce the synthetic gas. The idea of the project came from the rising of the fuel price and the extinction of the petroleum and the desire to find replacement for this non renewable energy. The Fuel Reactor that has been set up here was not feasible to produce the gas as expected. The main problem was the melting of the wire and the experiment has been continued for 3 times in order to test the Fuel Reactor. Futureudrecommendation after conducting this research will be using the wire that sheathed with silicon which can withstand the heat generated by the high current flow.udAnother solution will be using the alternative to the copper wire that is aluminium wire which widely used in the power grid system. A sufficient ammeter should beudready in order to measure the current that draws by the Fuel Reactor. The success of this research will be a technological breakthrough in the mechanical field.
机译:这项研究集中于燃料反应器生产合成气的可行性。燃料反应堆使用普通的自来水和低压电能来生产合成气。碳电极之间的电弧在水下产生高温(3000-4000°C)等离子体。 Fuel udReactor产生一氧化碳和氢气(COH 2)的混合物,这种气体可以在氧气或空气中非常干净地燃烧。这项研究的目的是生产燃料反应堆,并测试燃料反应堆生产合成气的可行性。该项目的想法来自于燃料价格的上涨和石油的消亡以及寻找替代这种不可再生能源的愿望。在这里设置的燃料反应堆无法按预期方式生产天然气。主要问题是金属丝的熔化,为了测试燃料反应器,实验已经进行了3次。进行这项研究后,未来的推荐建议是使用包覆有硅的电线,该电线可以承受高电流产生的热量。 ud另一种解决方案将使用替代铜线的替代方法,即铜线是电源中广泛使用的铝线网格系统。为了测量由燃料反应堆吸收的电流,应该准备足够的电流表。这项研究的成功将是机械领域的技术突破。

著录项

  • 作者

    Tan Kok Haw;

  • 作者单位
  • 年度 2007
  • 总页数
  • 原文格式 PDF
  • 正文语种
  • 中图分类

相似文献

  • 外文文献
  • 中文文献
  • 专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号