Wear Properties of A Shock Consolidated Metallic Glass and Glass-Crystalline Mixtures

摘要

Powder flakes prepared from 50 μm thick melt spun ribbons of Markomet 1064 (Ni_(52.5)Mo_(38)Cr_8 B_(1.5) wt%) were shock consolidatedin the unannealed and annealed condition. The unannealed flakes (microhardness 933 kg/mm^2) are amorphous while flakes annealed at 900ºC for 2 hours have an fcc structure with a grain size of 0.3 μm and microhardness of 800 kg/mm^2. The shock consolidated amorphous powder compact (250 kJ/kg shock energy) shows no crystal peaks in an X-ray diffractometer scan. Compacts of annealed powder (400 to 600 kJ/kg shock energies) contain amorphous material (18-21%) which was rapidly quenched from the melt formed at interparticle regions during the consolidation process. The microhardness of the amorphous interparticle material is 1100 kg/mm^2. Wear properties of the compacts measured in low velocity pin on disk tests show low average dynamic friction values (∿0.03). The 60 hour cumulative wear appears to correlate with the energy of shock compaction and surface porosity of the compacts rather than the metallic glass content.