首页> 外文OA文献 >Classification of pressure welding methods depending on thermal deformation conditions

【2h】

Classification of pressure welding methods depending on thermal deformation conditions

机译：压力焊接方法的分类取决于热变形条件

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Vsevolod Bulychev; Rashit Latypov; Svetlana Golubina; Gyulnara Latypova; Artem Rodin;
展开▼
作者单位

展开▼
年度 2020
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Classification of pressure welding methods depending on thermal deformation conditions [J] . Vsevolod Bulychev, Rashit Latypov, Svetlana Golubina, MATEC Web of Conferences . 2020,第1期

机译：压力焊接方法的分类取决于热变形条件
2. Deformation and failure behaviour of 316 LN austenitic stainless steel weld joint under thermomechanical low cycle fatigue in as-welded and thermally aged conditions [J] . T. Suresh Kumar, A. Nagesha, K. Mariappan, International Journal of Fatigue . 2021,第Auga期

机译：在焊接和热老化条件下热机械低循环疲劳下316 LN奥氏体不锈钢焊接的变形和失效行为
3. Features of heat and deformation behavior of a WER-600 reactor pressure vessel under conditions of inverse stratification of corium pool and worsened external vessel cooling during the severe accident. Part 1. The effect of the inverse melt stratification and in-vessel top cooling of corium pool on the thermal loads acting on WER-600 's reactor pressure vessel during a severe accident [J] . Loktionov Vladimir, Mukhtarov Erkin, Lyubashevskaya Irina Nuclear Engineering and Design . 2018,第JANa期

机译：在严重事故期间，WER-600反应堆压力容器在皮质池逆分层和恶化的外部容器冷却条件下的热和变形行为特征。第1部分。严重事故期间，反熔分层和皮质池的炉内顶部冷却对WER-600反应堆压力容器上作用的热负荷的影响
4. CFD-Tools for Assessment of the Reactor Pressure Vessel Integrity in Pressure Thermal Shock Conditions: Thermal-hydraulic Methods and Main Industrial Results on the French 900 MWe PWR RPV [C] . A. Martin, F Lestang, S. Belief, ASME pressure vessels and piping conference;PVP2009 . 2010

机译：用于在压力热冲击条件下评估反应堆压力容器完整性的CFD工具：法国900 MWe PWR RPV上的热工方法和主要工业成果
5. USE OF FINITE-ELEMENT METHOD TO SIMULATE THE PERFORMANCE OF GEOPRESSURED-GEOTHERMAL AQUIFERS UNDERGOING ELASTIC AND LINEAR VISCOELASTIC DEFORMATIONS. [D] . OKOYE, DAVID MOBIKE. 1980

机译：使用有限元方法模拟承受弹性和线性粘弹性变形的地压-地热含水层的性能。
6. Predicting Welding Distortion in a Panel Structure with Longitudinal Stiffeners Using Inherent Deformations Obtained by Inverse Analysis Method [O] . Wei Liang, Hidekazu Murakawa -1

机译：利用逆分析方法获得的固有变形来预测具有纵向加劲肋的面板结构中的焊接变形
7. Influence of Pulse Condition on Weld Penetration Shape Control Method of Penetration Shape and Welding Deformation using the Low Frequency Pulsed Arc Welding (Report 1) [O] . Mitsuyoshi NAKATANI, Takayoshi OHJI 2006

机译：使用低频脉冲电弧焊接脉冲条件对焊接渗透形状控制方法的影响（报告1）
8. Method for Compensating Bellows Pressure Loads While Accommodating Thermal Deformations [R] . Woodle, M. H. 1985

机译：在适应热变形的同时补偿波纹管压力负荷的方法

Classification of pressure welding methods depending on thermal deformation conditions

著录项

引文网络

相似文献

相关主题

期刊订阅