首页> 外文OA文献 >AN INVESTIGATION OF THE STRUCTURAL STRENGTH OF TRANSTIBIAL SOCKETS FABRICATED USING CONVENTIONAL METHODS AND RAPID PROTOTYPING TECHNIQUES

【2h】

AN INVESTIGATION OF THE STRUCTURAL STRENGTH OF TRANSTIBIAL SOCKETS FABRICATED USING CONVENTIONAL METHODS AND RAPID PROTOTYPING TECHNIQUES

机译：用常规方法和快速原型技术制造的抗静电插座结构强度的研究

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Brittany Pousett; Aimee Lizcano; Silvia Ursula Raschke;
展开▼
作者单位

展开▼
年度 2019
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. The development of a rapid prototyping prosthetic socket coated with a resin layer for transtibial amputees. [J] . Hsu LH, Huang GF, Lu CT, Prosthetics and orthotics international . 2010,第1期

机译：快速原型假肢插座的开发，该假肢插座涂有用于胫骨截肢者的树脂层。
2. Comparative study of the circumferential and volumetric analysis between conventional casting and three-dimensional scanning methods for transtibial socket: A preliminary study [J] . Mehmood W., Abd Razak N. A., Lau M. S., Proceedings of the Institution of Mechanical Engineers, Part H. Journal of Engineering in Medicine . 2019,第2期

机译：常规铸造与三维扫描方法之间的圆周和体积分析的比较研究：初步研究
3. Relative Strength of Pylon-to-Socket Attachment Systems Used in Transtibial Composite Sockets [J] . Richard H. Graebner, Thomas A. Current Journal of prosthetics and orthotics: JPO . 2007,第3期

机译：用于胫骨复合式承窝的塔架至承窝连接系统的相对强度
4. INVESTIGATION INTO THE FLEXURAL STRENGTH OF A MATERIAL FOR RESIN-REINFORCED RAPID PROTOTYPING TRANSTIBIAL SOCKETS [C] . L.H. Hsu, C.T. Lu, GF. Huang, ASME international design engineering technical conferences and computers and information in engineering conference 2010 . 2010

机译：树脂快速成型原型烟囱材料的抗弯强度研究
5. Generalized method for sizing transtibial prosthetic sockets in homogeneous populations. [D] . Beshai, Mary. 2004

机译：在同质人群中确定胫骨假体窝大小的通用方法。
6. Accuracy and precision of polyurethane dental arch models fabricated using a three-dimensional subtractive rapid prototyping method with an intraoral scanning technique [O] . Jae-Hong Kim, Ki-Baek Kim, Woong-Chul Kim, 2014

机译：口腔内扫描技术的三维减法快速成型方法制造的聚氨酯牙弓模型的精度和精密度
7. Microstructural characterization of the γ-TiAl alloy samples fabricated by direct laser fabrication rapid prototype technique [O] . D. Srivastava 2002

机译：直激光制造快速原型技术制备的γ电型合金样品的微观结构表征

AN INVESTIGATION OF THE STRUCTURAL STRENGTH OF TRANSTIBIAL SOCKETS FABRICATED USING CONVENTIONAL METHODS AND RAPID PROTOTYPING TECHNIQUES

著录项

引文网络

相似文献

相关主题

期刊订阅