Thermally Induced Filter Bias in TEOM (Tapered Element Oscillating Microbalances (Trade Name)) Mass Measurement

摘要

Researchers at the National Institute for Occupational Safety and Health (NIOSH) have long used stationary tapered element oscillating microbalances (TEOMS(Tradename)) in laboratory settings. They have served to assess the mass concentration of laboratory-generated particulates in experimental, dust chambers and they provide a reference method for comparison with other particulatemeasuring instruments. Current NIOSH research is focused on further adapting TEOM technology as a wearable personal dust monitor (PDM) for coal mining occupations. This investigation's goal is to help identify, quantify, and provide means for resolving certain TEOM-related error. The present research investigated bias caused by thermal effects on filter assemblies. New filters used in the PDM for 8 h tests show an average positive bias of 25.5 micro g, while similar tests of equivalent filters used in two 1400A model TEOMs show an average positive bias of 34.3 micro g. The derived bias values allow correction of previously collected biased data. Also, preheating the filters for 24 h at 46 degrees C shows significant bias reduction, with PDM pre-heated filters subsequently averaging -3.3 micro g and 1400A TEOM filters averaging 5.9 micro g. On a single-point comparison to gravimetric sampling, a 25.5 micro g bias is only significant at low mass loadings. At 2.5 micro g, this bias represents a negligible 1% of the mass measurement. If ordinary linear regression is used, the bias is still insignificant.