首页> 美国政府科技报告 >Mechanical properties of polyimide resin/glass fiber laminates for various time, temperature, and pressure exposures

【24h】

Mechanical properties of polyimide resin/glass fiber laminates for various time, temperature, and pressure exposures

机译：聚酰亚胺树脂/玻璃纤维层压板的机械性能，适用于各种时间，温度和压力暴露

获取原文

页面导航

摘要
著录项
引文网络
相似文献
相关主题

摘要

Effect of temperature, pressure, time on shear flexure strengths of polyimide-glass fiber laminates

著录项

作者
Pride, R. A.; Schmidt, F. W.; Stein, B. A.;
展开▼
作者单位

展开▼
年度 1968
页码 1-31
总页数 31
原文格式 PDF
正文语种 eng
中图分类工业技术;
关键词
GLASS FIBERS; LAMINATES; POLYIMIDES; PRESSURE EFFECTS; SHEAR FLOW; TEMPERATURE EFFECTS; AIRCRAFT STRUCTURES; CONFERENCES; CONSTRUCTION MATERIALS; FLEXIBILITY; MECHANICAL PROPERTIES; RESIN BONDING;

机译：玻璃纤维; LamINaTEs;聚酰亚胺;压力效应;剪切流量;温度效应;飞机结构;大会;建筑材料;灵活性;机械性能;树脂粘合;

相似文献

外文文献
中文文献
专利

1. Tensile properties of GFRP laminates after exposure to elevated temperatures: Effect of fiber configuration, sample thickness, and time of exposure [J] . Ashrafi Hamed, Bazli Milad, Jafari Armin, Composite Structures . 2020,第Apra期

机译：暴露于升高温度后GFRP层压板的拉伸性能：纤维构型，样品厚度和曝光时间的影响
2. Fabrication and origin of flame retarding glass fiber/bismaleimide resin composites with high thermal stability, good mechanical properties, and a low dielectric constant and loss for high frequency copper clad laminates [J] . Zhang Zhiyong, Yuan Li, Liang Guozheng, RSC Advances . 2016,第24期

机译：具有高热稳定性，良好机械性能的阻燃玻璃纤维/双聚酰胺树脂复合材料的制造和起源，以及高频铜包层压板的低介电常数和损耗
3. Fabrication and origin of flame retarding glass fiber/bismaleimide resin composites with high thermal stability, good mechanical properties, and a low dielectric constant and loss for high frequency copper clad laminates [J] . Zhiyong Zhang, Li Yuan, Guozheng Liang, RSC Advances . 2016,第24期

机译：具有高热稳定性，良好机械性能的阻燃玻璃纤维/双聚酰胺树脂复合材料的制造和起源，以及高频铜包层压板的低介电常数和损耗
4. Tribological Properties of Carbon Fiber Epoxy Resin Composite and Polyimide Material at High and Low Temperatures [C] . Yu ZHANG, Guoding CHEN, Lin WANG Asia Conference on Mechanical and Materials Engineering . 2020

机译：高温下碳纤维环氧树脂复合材料和聚酰亚胺材料的摩擦学特性
5. The effect of layup and pressure on mechanical properties of fiberglass and kenaf fiber composites. [D] . Fulton, Ian Taylor. 2011

机译：铺层和压力对玻璃纤维和洋麻纤维复合材料力学性能的影响。
6. Moisture Absorption/Desorption Effects on Flexural Property of Glass-Fiber-Reinforced Polyester Laminates: Three-Point Bending Test and Coupled Hygro-Mechanical Finite Element Analysis [O] . Xu Jiang, Jie Song, Xuhong Qiang, 2016

机译：水分吸收/解吸对玻璃纤维增强聚酯层压板弯曲性能的影响：三点弯曲试验和湿力学有限元分析
7. Mechanical properties of various concrete after high temperature exposure Mechanical property of various types of concrete after high temperature exposure is investigated. Considering compressive strength requirement for a vertical element in high rise building, concrete specimens with various design strengths of 35, 80, 100, and 150 MPa were tested. Particularly, the influence of incorporated steel fiber on fire resistance is of interest in this study. Experimental results show that the fire resistance depends on the design strength and steel fiber content. Normal strength concrete (NSC) of a design strength of 35 MPa or high performance concrete (HPC) of 80-100 MPa does not spall when exposed to 100-400 °C of temperature. However, an explosive spalling occurs at 300 °C when the HPCs contain 1 vol. of steel fiber. Ultra-high performance concrete (UHPC) of a design strength of 150 MPa and 1.5 vol. of steel fiber also shows dramatic spalling at 300 °C. The experimental results found in this study can contribute to a better understanding of the behaviors of HPC and UHPC under fire and the role of steel fiber on the fire resistance. [O] . 2017

机译：研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求，测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是，在这项研究中，掺入钢纤维对耐火性的影响。实验结果表明，耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时，80-100MPa的设计强度为35MPa或高性能混凝土（HPC）的正常强度混凝土（NSC）不会击落。然而，当HPC含有1体积的钢纤维的百分比时，爆炸性剥落发生在300℃。超高性能混凝土（UHPC）的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。

Mechanical properties of polyimide resin/glass fiber laminates for various time, temperature, and pressure exposures

摘要

著录项

引文网络

相似文献

相关主题

期刊订阅