首页> 美国政府科技报告 >Fatigue Lives of Specimens Representing Critical Locations in Mirage III Spars under Australian and Swiss Test Spectra
【24h】

Fatigue Lives of Specimens Representing Critical Locations in Mirage III Spars under Australian and Swiss Test Spectra

机译:在澳大利亚和瑞士测试光谱下,代表mirage III spars中关键位置的样品的疲劳寿命

获取原文

摘要

Full-scale flight-by-flight fatigue tests on Mirage III fighter aircraft wings indicated much greater differences in the flights to failure than were expected. This problem has been by conducting fatigue tests on specimens representing the major failure locations in the test wings - a blind anchor-nut hole and an interference-fit bolt hole - under flight-by-flight loading sequences corresponding to those used in the full-scale tests. Constant-amplitude fatigue tests were carried out on the blind-hole specimens to provide information for life estimation purposes, and fractographic crack propagation studies were conducted on selected blind-hole specimens. The experimentally determined lives of both types of specimen were greater under the blind hole stress spectrum. Depending on the stress scaling factor considered the life ratio obtained by grouping together the two stress spectra and the two types of specimens were between about 3 and 4.2. This compares with a ratio of 4.6 obtained for the respective full-wing scale wing fatigue tests. For the blind anchor-nut hole specimens the predicted fatigue lives were less than those obtained experimentally at high stress scaling factors, but at low stress scaling factors the converse was the case. The ratios of the predicted lives to failure were much greater than those found experimentally. Under both stress spectra, the lives of front-flange bolt hole specimens incorporating interference-fit bolts were between 3 and 4 times greater than those with clearance-fit bolts.

著录项

相似文献

  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号