...
首页> 外文期刊>PACE: Pacing and clinical electrophysiology >Radiofrequency catheter ablation: different cooled and noncooled electrode systems induce specific lesion geometries and adverse effects profiles.
【24h】

Radiofrequency catheter ablation: different cooled and noncooled electrode systems induce specific lesion geometries and adverse effects profiles.

机译:射频导管消融:不同的冷却和非冷却电极系统会引起特定的病变几何形状和不良反应。

获取原文
获取原文并翻译 | 示例
           

摘要

The success and safety of standard catheter radiofrequency ablation may be limited for ablation of atrial fibrillation and ventricular tachycardia. The aim of this study was to characterize and compare different cooled and noncooled catheter systems in terms of their specific lesion geometry, incidence of impedance rise, and crater and coagulum formation to facilitate appropriate catheter selection for special indications. The study investigated myocardial lesion generation of three cooled catheter systems (7 Fr, 4-mm tip): two saline irrigation catheters with a showerhead-type electrode tip (sprinkler) and a porous metal tip and an internally cooled catheter. Noncooled catheters (7 Fr) had a large tip electrode (8 mm) and a standard tip electrode (4 mm). RF energy was delivered on isolated porcine myocardium superfused with heparinized pig blood (37 degrees C) at power settings of 10-40 W. Both irrigated systems were characterized by a large lesion depth (8.1 +/- 1.6 mm) and a large lesion diameter (13.8 +/- 1.6 mm). In comparison, internally cooled lesions showed a similar lesion depth (8.0 +/- 1.0 mm), but a significantly smaller lesion diameter (12.3 +/- 1.2 mm,P = 0.04). Large tip lesions had a similar lesion diameter (14.5 +/- 1.6 mm), but a significantly smaller lesion depth (6.3 +/- 1.0 mm,P = 0.002) compared to irrigated lesions. However, lesion volume was not significantly different between the three cooled and the large tip catheter. To induce maximum lesion size, power requirements were three times higher for the irrigation systems and two times higher for the internally cooled and the large tip catheter compared to the standard catheter. Impedance rise was rarest with irrigated and large tip ablation. In case of impedance rise crater formation was a frequent observation (61-93%). Irrigated catheters prevented coagulum formation most effectively. Irrigated rather than internally cooled ablation appears to be most adequate for the induction of deep and long lesions at a low rate of impedance rise and thrombus formation. Large tip ablation may be feasible for the creation of long linear lesions, however, with an increased risk of thrombus formation.
机译:对于房颤和室性心动过速的消融,标准导管射频消融的成功和安全性可能受到限制。这项研究的目的是根据其特定的病变几何形状,阻抗升高的发生率以及火山口和凝结物的形成,对不同的冷却和非冷却导管系统进行表征和比较,以帮助为特殊适应症选择合适的导管。该研究调查了三种冷却的导管系统(7 Fr,尖端为4 mm)的心肌病变的产生:两个盐水冲洗导管,带有喷头式电极尖端(喷头),多孔金属尖端和内部冷却的导管。非冷却导管(7 Fr)具有较大的尖端电极(8 mm)和标准尖端电极(4 mm)。在能量设定为10-40 W的情况下,在与猪肝素融合的分离的猪心肌上传递RF能量,功率设定为10-40W。两种灌溉系统的特点是病变深度大(8.1 +/- 1.6 mm),且病变直径大(13.8 +/- 1.6毫米)。相比之下,内部冷却的病变显示相似的病变深度(8.0 +/- 1.0 mm),但病变直径明显较小(12.3 +/- 1.2 mm,P = 0.04)。与冲洗病变相比,大的尖端病变具有相似的病变直径(14.5 +/- 1.6 mm),但病变深度明显较小(6.3 +/- 1.0 mm,P = 0.002)。但是,在三个冷却导管和大尖端导管之间,病变体积没有显着差异。为了引起最大的病变大小,与标准导管相比,冲洗系统的功率需求高三倍,内部冷却的和大尖端导管的功率需求高三倍。灌溉和大尖端消融后,阻抗升高最为罕见。在阻抗升高的情况下,经常观察到形成凹坑(61-93%)。灌溉导管可最有效地防止凝结物形成。灌溉而不是内部冷却的消融似乎最适合以低的阻抗升高和血栓形成的速率诱发深部和长期病变。大尖端消融对于形成长的线性病变可能是可行的,但是,血栓形成的风险增加。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号