...
首页> 外文期刊>Surgical Endoscopy >Surgical smoke management for minimally invasive (micro)endoscopy: an experimental study.
【24h】

Surgical smoke management for minimally invasive (micro)endoscopy: an experimental study.

机译:用于微创(微)内窥镜的手术烟雾管理:一项实验研究。

获取原文
获取原文并翻译 | 示例
           

摘要

BACKGROUND: The aim of this study was to investigate the use of surgical smoke-producing procedures such as laser ablation or electrosurgery in minimally invasive microendoscopic procedures. This study proposes a technical solution to efficiently remove surgical smoke from very small endoscopic cavities using microports as small as 20 G (0.9 mm) in diameter. METHODS: The experimental laboratory study used small, rigid, transparent plastic cavity models connected with tubes and pressure sensors to establish an endoscopic in vitro laboratory model. A Kalium-Titanyl-Phosphate (KTP) laser with a 0.5-mm fiber optic probe was used to produce smoke from bovine scleral tissue in the cavity. Endoscopic gas insufflation into the model was generated by pressurized air and a microvalve. A laboratory vacuum pump provided smoke and gas suction via a microvalve. A self-built control and steering system was utilized to control intracavital pressure during experimental insufflation and suction. RESULTS: Problems related to smoke-generating processes, such as laser vaporization or electrocautery, in small closed cavities were first analyzed. A theoretical and mechatronic laboratory model was established and tested. Intracavital pressure and gas flow were measured first without and then with smoke generation. A new construction design for the suction tube was proposed due to rapid obstruction by smoke particles. CONCLUSIONS: Surgical smoke evacuation from endoscopic cavities that are as small as 2 cm in diameter via minimally invasive ports as small as 20 G (0.9 mm) in diameter may be safe and efficient if sufficient gas exchange is provided during smoke generation by laser or electrosurgical instruments. However, maintaining a low and constant pressure in the cavity during gas exchange and adopting a special construction design for the suction tube are essential to provide an excellent view during the surgical maneuver and to minimize potential toxic side effects of the smoke.
机译:背景:这项研究的目的是研究在微创显微内窥镜手术中使用激光消融或电外科手术等产生烟雾的手术方法。这项研究提出了一种技术解决方案,可使用直径小于20 G(0.9 mm)的微型端口从很小的内窥镜腔中有效去除手术烟雾。方法:实验性实验室研究使用小的,刚性的,透明的塑料腔体模型与管和压力传感器连接,以建立内窥镜体外实验模型。带有0.5毫米光纤探头的磷酸钾钛酸酯(KTP)激光器用于从空腔中的牛巩膜组织中产生烟雾。通过加压空气和微型阀将内窥镜气体吹入模型。实验室真空泵通过微型阀提供烟气抽吸。在实验吹入和抽吸过程中,使用了自建的控制和转向系统来控制腔内压力。结果:首先分析了在小型封闭腔中与烟雾产生过程有关的问题,例如激光蒸发或电灼。建立并测试了理论和机电实验室模型。首先在没有烟气的情况下然后测量有烟气的情况下测量腔内压力和气体流量。由于烟雾颗粒的迅速阻塞,提出了一种新的吸管结构设计。结论:如果在通过激光或电外科手术产生烟雾的过程中提供了足够的气体交换,则通过直径最小为20 G(0.9 mm)的微创端口从直径小至2 cm的内窥镜腔中排出手术烟雾是安全有效的仪器。但是,在气体交换过程中在腔体内保持较低且恒定的压力并为抽吸管采用特殊的结构设计,对于在手术操作期间提供出色的视野并最大程度地减少烟雾的潜在毒副作用至关重要。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号