【24h】

Millimeter wave silicon micromachined waveguide probe as an aid for skin diagnosis - results of measurements on phantom material with varied water content

机译:毫米波硅微机械波导探头有助于皮肤诊断-水分含量不同的幻影材料的测量结果

获取原文
获取原文并翻译 | 示例
           

摘要

Background: More than 2 million cases of skin cancer are diagnosed annually in the United States, which makes it the most common form of cancer in that country. Early detection of cancer usually results in less extensive treatment and better outcome for the patient. Millimeter wave silicon micromachined waveguide probe is foreseen as an aid for skin diagnosis, which is currently based on visual inspection followed by biopsy, in cases where the macroscopical picture raises suspicion of malignancy. Aims: Demonstration of the discrimination potential of tissues of different water content using a novel micromachined silicon waveguide probe. Secondarily, the silicon probe miniaturization till an inspection area of 600 × 200 μm2, representing a drastic reduction by 96.3% of the probing area, in comparison with a conventional WR-10 waveguide. The high planar resolution is required for histology and early-state skin-cancer detection. Material and methods: To evaluate the probe three phantoms with different water contents, i.e. 50%, 75% and 95%, mimicking dielectric properties of human skin were characterized in the frequency range of 95-105 GHz. The complex permittivity values of the skin are obtained from the variation in frequency and amplitude of the reflection coefficient (S11), measured with a Vector Network Analyzer (VNA), by comparison with finite elements simulations of the measurement set-up, using the commercially available software, HFSS. The expected frequency variation is calculated with HFSS and is based on extrapolated complex permittivities, using one relaxation Debye model from permittivity measurements obtained using the Agilent probe. Results: Millimeter wave reflection measurements were performed using the probe in the frequency range of 95-105 GHz with three phantoms materials and air. Intermediate measurement results are in good agreement with HFSS simulations, based on the extrapolated complex permittivity. The resonance frequency lowers, from the idle situation when it is probing air, respectively by 0.7, 1.2 and 4.26 GHz when a phantom material of 50%, 75% and 95% water content is measured. Discussion: The results of the measurements in our laboratory set-up with three different phantoms indicate that the probe may be able to discriminate between normal and pathological skin tissue, improving the spatial resolution in histology and on skin measurements, due to the highly reduced area of probing. Conclusion: The probe has the potential to discriminate between normal and pathological skin tissue. Further, improved information, compared to the optical histological inspection can be obtained, i.e. the complex permittivity characterization is obtained with a high resolution, due to the highly reduced measurement area of the probe tip.
机译:背景:在美国,每年诊断出超过200万例皮肤癌病例,这使其成为该国最常见的癌症形式。早期发现癌症通常会导致较少的广泛治疗并为患者带来更好的结果。可以预见,毫米波硅微机械波导探头可作为皮肤诊断的辅助手段,在肉眼观察到恶性肿瘤的情况下,目前基于肉眼检查然后进行活检。目的:使用新型微加工的硅波导探头演示不同水分含量的组织的识别潜力。其次,与常规的WR-10波导相比,硅探针小型化到600×200μm2的检查面积,与探测面积相比减少了96.3%。组织学和早期状态的皮肤癌检测需要高平面分辨率。材料和方法:为了评估该探头,在95-105 GHz的频率范围内,模拟了三种不同水含量(分别为50%,75%和95%)的人体模型。皮肤的复介电常数值是通过使用矢量网络分析仪(VNA)测量的反射系数的频率和幅度的变化(S11),通过与商用测量装置的有限元模拟比较而获得的可用软件HFSS。预期的频率变化是使用HFSS计算的,并基于外推复数介电常数,使用安捷伦探针获得的介电常数测量值中的一个弛豫Debye模型得出。结果:使用探头在95-105 GHz的频率范围内使用三种幻象材料和空气进行毫米波反射测量。基于外推的复介电常数,中间测量结果与HFSS模拟非常吻合。当测量水含量为50%,75%和95%的幻像材料时,共振频率从探测空气时的闲置状态分别降低了0.7、1.2和4.26 GHz。讨论:在我们的实验室设置中,使用三种不同的体模进行的测量结果表明,该探头可能能够区分正常皮肤组织和病理皮肤组织,从而由于面积大大减小,从而提高了组织学和皮肤测量的空间分辨率探测。结论:该探针具有区分正常皮肤组织和病理皮肤组织的潜力。此外,由于探针尖端的测量面积大大减小,因此与光学组织学检查相比,可以获得改进的信息,即,可以高分辨率获得复介电常数特性。

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号