...
首页> 外文期刊>SIAM Journal on Applied Mathematics >Asymptotic bifurcation solutions for compressions of a clamped nonlinearly elastic rectangle: Transition region and barrelling to a corner-like profile
【24h】

Asymptotic bifurcation solutions for compressions of a clamped nonlinearly elastic rectangle: Transition region and barrelling to a corner-like profile

机译:压缩非线性弹性矩形的压缩的渐近分叉解:过渡区域和桶形到拐角状轮廓

获取原文
获取原文并翻译 | 示例
           

摘要

In the two experiments by Beatty and his coauthors on the compressions of elastic rectangles/bars, it was found that there is a transition region of the aspect ratio which separates buckling from barrelling. Friction, which prevents the lateral movement of the end cross section, might be the cause. Here, we study the compressions with clamped end conditions. One of the purposes is to show, with this setting in which the lateral movement of the end cross section is limited, that there is indeed such a transition region. By using combined series-asymptotic expansions, we derive two decoupled nonlinear ordinary differential equations (ODEs). By phase plane analysis, the leading-order axial strain can be obtained from one of the ODEs. Then an eigenvalue problem can be formulated from another ODE, which is solved by the WKB (Wentzel-Kramers- Brillouin) method. It is found that when the aspect ratio is relatively large there is only a bifurcation to the barrelling which leads to a corner-like profile on the lateral boundaries of the rectangle. When the aspect ratio is relatively small there are only bifurcation points which lead to the buckled profiles. A lower bound of the aspect ratio for barrelling and a different upper bound for buckling are found, which implies the existence of the above-mentioned transition region. Another finding is that, after the barrelling, no further bifurcation to buckling can occur. The critical buckling loads obtained from our asymptotic solutions are also compared with those obtained from the Euler buckling formula.
机译:在Beatty及其合作者的两个实验中,对弹性矩形/条的压缩进行了研究,发现存在长宽比的过渡区域,该区域将屈曲与滚轧分开。可能是造成摩擦的原因,它阻止了端部横截面的横向移动。在这里,我们研究在最终条件下的压缩情况。目的之一是在这种设置下限制端部横截面的横向运动,以表明确实存在这样的过渡区域。通过使用组合级数渐近展开式,我们导出了两个解耦的非线性常微分方程(ODE)。通过相平面分析,可以从一个ODE中获得前导轴向应变。然后可以从另一个ODE提出特征值问题,这可以通过WKB(Wentzel-Kramers-Brillouin)方法解决。可以发现,当长宽比较大时,仅在分叉处产生分叉,从而在矩形的横向边界上形成角状轮廓。当长宽比相对较小时,只有分叉点会导致弯曲轮廓。发现了用于滚磨的纵横比的下限和用于屈曲的不同的上限,这意味着存在上述过渡区域。另一个发现是,在滚压之后,不会发生进一步的分叉。从渐近解获得的临界屈曲载荷也与从欧拉屈曲公式获得的临界屈曲载荷进行了比较。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号