首页> 外文期刊>Separation and Purification Technology >Analysis of mass transport models based on Maxwell-Stefan theory and Fick's law for protein uptake to porous anion exchanger
【24h】

Analysis of mass transport models based on Maxwell-Stefan theory and Fick's law for protein uptake to porous anion exchanger

机译:基于Maxwell-Stefan理论和Fick定律的蛋白质对多孔阴离子交换剂的吸收质量传输模型

获取原文
获取原文并翻译 | 示例
           

摘要

Parallel mass transport of protein in the pore fluid and on the pore wall of porous adsorbent is modeled based on the Maxwell-Stefan theory that uses chemical potential gradient as the diffusive driving force.The uptake kinetics of proteins (BS A and gamma-globulin) to anion exchanger is studied by batch adsorption.The parallel diffusion model based on the MS approach (MS-ParD model) and its simplified form,the surface diffusion model (MS-SD model),are analyzed and compared with those based on the Fick's law (F-ParD and F-SD models).It is found that the models from the MS equation and the Fick's law are quite different from each other.For the MS-ParD model,both the pore and surface diffusion coefficients are constant,while the surface or pore diffusion coefficient for the F-ParD model varies significantly with initial protein concentration.Moreover,the MS-SD model can be used to describe the uptake of a protein that shows nearly a rectangular isotherm,in which the surface diffusion contributes very small to the mass transport.In addition,an equation that describes the relationship between the surface diffusion coefficients for the MS-SD and F-SD models is proposed.It is observed that the ratio of the surface diffusion coefficients for the MS-ParD and F-ParD models for less favorably adsorbed protein can be qualitatively described by a theoretical equation.It is concluded that the MS-ParD model is superior to the F-ParD model for describing the non-ideality of adsorbed protein.
机译:蛋白质在多孔流体中和多孔吸附剂的孔壁上的平行质量传输是基于麦克斯韦-斯特凡理论(Maxwell-Stefan theory)建立的,该理论使用化学势梯度作为扩散驱动力。蛋白质(BSA和γ-球蛋白)的吸收动力学通过分批吸附法对阴离子交换剂进行了研究。对基于MS方法的平行扩散模型(MS-ParD模型)及其简化形式,表面扩散模型(MS-SD模型)进行了分析,并与基于Fick法的平行扩散模型进行了比较。定律(F-ParD和F-SD模型)。从MS方程和菲克定律得出的模型彼此之间非常不同。对于MS-ParD模型,孔和表面扩散系数均是常数, F-ParD模型的表面或孔扩散系数随初始蛋白质浓度而有显着变化。此外,MS-SD模型可用于描述显示出近似矩形等温线的蛋白质的摄取,其中表面扩散此外,提出了一个描述MS-SD和F-SD模型表面扩散系数之间关系的方程。观察到MS-SD表面扩散系数之比可以用理论方程式定性地描述不那么理想的吸附蛋白的ParD和F-ParD模型。结论是,MS-ParD模型在描述吸附蛋白的非理想性方面优于F-ParD模型。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号