...
首页> 外文期刊>Separation and Purification Technology >Ozone assisted electrocoagulation for decolorization of C.I.Reactive Black 5 in aqueous solution:An investigation of the effect of operational parameters
【24h】

Ozone assisted electrocoagulation for decolorization of C.I.Reactive Black 5 in aqueous solution:An investigation of the effect of operational parameters

机译:臭氧辅助电凝使C.I.活性黑5水溶液脱色:操作参数影响的研究

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

This study was performed to investigate the variables that influence the efficiency of color removal from a solution containing an azo dye(C.I.Reactive Black 5,abbreviated here as RB5)by the combination of ozonation and electrocoagulation at iron electrodes.Several working parameters,such as initial pH,initial dye concentration,current density,salt(K2SO4)concentration,temperature,ozone flow rate and distance between the electrodes,were studied in an attempt to achieve higher color removal efficiency.The experimental results reveal that the color of RB5 in the aqueous phase was removed effectively.Under the conditions of an initial dye concentration of 100 mg/L,initial pH of 5.5,current density of 10 mA/cm2,salt concentration of 5000 mg/L,temperature of 20 °C,ozone flow rate of 20 mL/min(ozone dose 0.20 g/h),and interelectrode distance of 1 cm,the color-removal efficiency reached 94%,corresponding to a reduction in COD of more than 60%.The energy consumption of the technique was approximately 33 kWh/kg of COD removal.
机译:这项研究的目的是通过结合臭氧氧化和电凝作用在铁电极上研究影响偶氮染料(CIReactive Black 5,在这里缩写为RB5)溶液中脱色效率的变量。几个工作参数,例如研究了初始pH,初始染料浓度,电流密度,盐(K2SO4)浓度,温度,臭氧流速和电极之间的距离,以期获得更高的脱色效率。实验结果表明,RB5的颜色在初始染料浓度为100 mg / L,初始pH为5.5,电流密度为10 mA / cm2,盐浓度为5000 mg / L,温度为20°C,臭氧流速为条件下有效去除水相20mL / min(臭氧剂量0.20g / h),电极间距离为1cm,脱色效率达到94%,COD减少超过60%。该技术的能耗约为去除33 kWh / kg的COD。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号