Granulation of Coke Breeze Fine for Using in the Sintering Process

摘要

Coke breeze is the main fuel used in the sintering process. The value of -3+1 mm. represents the most favourable particle size for coke breeze in the sintering process. About 20% of total coke fines (-0.5 mm) are produced during different steps of preparation. Introducing these fines during the sintering process proves to be very harmful for different operating parameters. Thus .this study aims at investigating the production of granules resulting from these fines using molasses as organic binder and its application in sintering of an iron ore. The results showed that the granules having the highest mechanical properties were obtained with 14.5 wt % molasses addition. The sintering experiments were performed by using coke breeze in different shapes (-3+1 mm in size, coke breeze without sieving and coke breeze granules -3+1 mm). The reduction experiments, microscopic structure and X-ray analysis for the produced sinter were carried out. The results revealed that, all sinter properties (such as shatter test, productivity of sinter machine and blast furnace, reduction time and chemical compsition) for produced sinter by using coke breeze with size -3+1 mm and coke breeze granules were almost the same. The iron ore sinter which was produced by using coke breeze without sieving yielded low productivity for both sinter machine and blast furnace. Furthermore, using coke breeze without sieving in sintering of an iron ore decreases the vertical velocity of sinter machine and increases the reduction time.