...
首页> 外文期刊>Optik: Zeitschrift fur Licht- und Elektronenoptik: = Journal for Light-and Electronoptic >Improvement of the conversion efficiency and power of thin film silicon solar cells by embedding metallic nanostructures in depletion region
【24h】

Improvement of the conversion efficiency and power of thin film silicon solar cells by embedding metallic nanostructures in depletion region

机译:通过将金属纳米结构嵌入耗尽区来提高薄膜硅太阳能电池的转换效率和功率

获取原文
获取原文并翻译 | 示例

摘要

In this paper we present a full wave 3D-finite difference time domain (FDTD) optical and electrical simulation study of ultra thin silicon solar cell. We have analyzed the optical generation rate and absorption enhancement in thin film solar cell in which silver nanoparticles are embedded in the depletion region of p-n junction in the active layer of solar cell. Then we investigate efficiency and power output of solar cell by solving the Poisson and drift diffusion equations on a finite element mesh, by considering the extracted generation rate data from FDTD simulations. In this work localized surface plasmons (LSPs) are the key factor for absorption and electron-hole generation rate enhancement in thin film solar cell. We show that these enhancements result from dense near field provided by LSPs and ensuring that a large fraction of the incident optical power (which is considered to be AM1.5) dissipates in the absorbing active layer rather than in the MNPs. We study in detail the effect of metal nanoparticle (MNP) geometry in solar cell performance and optimize geometrical parameters of MNPs through particle swarm (PS) optimization algorithm. The optimized structure of spherical MNPs with a diameter of 70 nm and spacing of 180 nm, and optimized structure of nanorod MNPs with a diameter of 70 nm and center to center spacing of 190 nm and length of 150 nm which are imbedded in depletion layer, provided 32.83% and 39% improvements in the efficiency relative to the reference cell, respectively. (C) 2016 Elsevier GmbH. All rights reserved.
机译:在本文中,我们提出了超薄硅太阳能电池的全波3D时差有限域(FDTD)光学和电气仿真研究。我们已经分析了薄膜太阳能电池的光产生速率和吸收增强,在薄膜太阳能电池中,银纳米颗粒嵌入太阳能电池活性层中p-n结的耗尽区。然后,通过考虑从FDTD模拟中提取的发电率数据,通过在有限元网格上求解泊松和漂移扩散方程来研究太阳能电池的效率和功率输出。在这项工作中,局部表面等离子体激元(LSPs)是薄膜太阳能电池吸收和电子空穴生成速率提高的关键因素。我们表明,这些增强来自LSP提供的密集近场,并确保大部分入射光功率(被认为是AM1.5)消散在吸收活性层而不是MNP中。我们详细研究了金属纳米粒子(MNP)几何形状对太阳能电池性能的影响,并通过粒子群(PS)优化算法优化了MNP的几何参数。嵌入耗尽层的直径为70 nm,间距为180 nm的球形MNP的优化结构以及直径为70 nm,中心距为190 nm,长度为150 nm的纳米棒MNP的优化结构,相对于参考电池,效率分别提高了32.83%和39%。 (C)2016 Elsevier GmbH。版权所有。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号