首页> 外文期刊>Rubber Chemistry and Technology >CONTINUOUS ULTRASONIC DEVULCANIZATION: COMPARISON OF CARBON BLACK FILLED SYNTHETIC ISOPRENE AND NATURAL RUBBERS
【24h】

CONTINUOUS ULTRASONIC DEVULCANIZATION: COMPARISON OF CARBON BLACK FILLED SYNTHETIC ISOPRENE AND NATURAL RUBBERS

机译:连续超声显影:碳黑填充合成异戊二烯和天然橡胶的比较

获取原文
获取原文并翻译 | 示例
           

摘要

Continuous ultrasonic devulcanization of carbon black (CB) filled isoprene rubber (IR) was carried out Similar to unfilled IR, power consumption during the devulcanization of the filled PR increased with the increase of ultrasonic amplitude indicating a greater extent of devulcanization. This was in contrast with the devulcanization of CB filled natural rubber (NR) where power consumption showed a maximum at an intermediate amplitude suggesting a lesser extent of devulcanization at higher amplitude Such a behavior evidently resulted from the difference in the amount of stereo-regular structures in the IR and NR rubbers. Gel fraction and crosslink density of the virgin vulcanizates, devulcanizates and revulcanizates were characterized Kinetics of revulcanization, rheological properties of the devulcanizates and mechanical properties of revulcanizates were compared with those of virgin uncured IR and their vulcanizates The effect of processing oil on the IR vulcanization, devulcanization and revulcanization was examined indicating a slight delay of the vulcanization and lower torque without affecting the degree of reversion The addition of oil caused more devulcanization as indicated by an increase in the ultrasonic power consumption and a reduction of the gel fraction and crosslink density of devulcanized rubbers The revulcanization of the IR occurred without the induction period, regardless of the presence of CB and processing oil, The retarder introduced in the recipe was effective in improving the scorch safety and minimizing the reversion in revulcanization The experimental data on normalized gel fraction versus crosslink density of filled fR and NR at low CB loadings was found to fall into the master curve, which is probably determined by the main chain structure of both rubbers consisting of cis-1,4 isoprene. At high CB loadings, some differences were observed. The simulation results predicted such a behavior
机译:进行了炭黑(CB)填充的异戊二烯橡胶(IR)的连续超声脱硫。与未填充的IR相似,填充的PR脱硫过程中的功耗随着超声振幅的增加而增加,表明脱硫程度更大。这与CB填充天然橡胶(NR)的脱硫相反,后者的耗电量在中间振幅处显示最大值,表明在较高振幅下的脱硫程度较小。这种现象显然是由于立体规则结构量的差异造成的在IR和NR橡胶中。表征了原始硫化胶,脱硫化胶和硫化胶的凝胶分数和交联密度,表征了硫化的动力学,将硫化胶的流变性能和硫化胶的机械性能与未硫化的原始IR及其硫化胶进行了比较加工油对红外硫化的影响,检查了脱硫和硫化过程,表明硫化略有延迟,扭矩降低,而又不影响回复度。添加油会导致更多的脱硫现象,这表现为超声波功率消耗的增加以及脱硫的凝胶分数和交联密度的降低橡胶,IR的硫化在没有诱导期的情况下发生,无论是否存在CB和加工油,配方中引入的阻滞剂均可有效提高焦烧安全性并最大程度地减少硫化的返原。发现在低CB负荷下,填充的fR和NR的比值与交联密度的关系落入主曲线,这可能由两种由顺式1,4异戊二烯组成的橡胶的主链结构决定。在高CB负载下,观察到一些差异。仿真结果预测了这种行为

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号