...
首页> 外文期刊>Remote Sensing of Environment: An Interdisciplinary Journal >Sub-pixel precision image matching for measuring surface displacements on mass movements using normalized cross-correlation
【24h】

Sub-pixel precision image matching for measuring surface displacements on mass movements using normalized cross-correlation

机译:亚像素精确图像匹配,可使用归一化互相关来测量质量运动中的表面位移

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

This study evaluates the performance of two fundamentally different approaches to achieve sub-pixel precision of normalised cross-correlation when measuring surface displacements on mass movements from repeat optical images. In the first approach, image intensities are interpolated to a desired sub-pixel resolution using a bi-cubic interpolation scheme prior to the actual displacement matching. In the second approach, the image pairs are correlated at the original image resolution and the peaks of the correlation coefficient surface are then located at the desired sub-pixel resolution using three techniques, namely bi-cubic interpolation, parabola fitting and Gaussian fitting. Both principal approaches are applied to three typical mass movement types: rockglacier creep, glacier flow and land sliding. In addition, the influence of pixel resolution on the accuracies of displacement measurement using image matching is evaluated using repeat images resampled to different spatial resolutions. Our results show that bi-cubic interpolation of image intensity performs best followed by bi-cubic interpolation of the correlation surface. Both Gaussian and parabolic peak locating turn out less accurate. By increasing the spatial resolution (i.e. reducing the ground pixel size) of the matched images by 2 to 16 times using intensity interpolation, 40% to 80% reduction in mean error in reference to the same resolution original image could be achieved. The study also quantifies how the mean error, the random error, the proportion of mismatches and the proportion of undetected movements increase with increasing pixel size (i.e. decreasing spatial resolution) for all of the three mass movement examples investigated.
机译:这项研究评估了两种基本不同的方法的性能,这些方法在测量重复光学图像的质量运动中的表面位移时,可实现归一化互相关的子像素精度。在第一种方法中,在实际位移匹配之前,使用双三次插值方案将图像强度插值到所需的子像素分辨率。在第二种方法中,使用三种技术,即双三次插值,抛物线拟合和高斯拟合,将图像对与原始图像分辨率相关,然后将相关系数表面的峰值定位在所需的子像素分辨率。两种主要方法都适用于三种典型的质量运动类型:岩石冰川蠕变,冰川流动和地面滑动。此外,使用重复采样到不同空间分辨率的重复图像,可以评估像素分辨率对使用图像匹配进行的位移测量精度的影响。我们的结果表明,图像强度的双三次插值效果最好,其次是相关表面的双三次插值。高斯和抛物线的峰值定位结果都不太准确。通过使用强度插值将匹配图像的空间分辨率提高2到16倍(即减小地面像素大小),相对于相同分辨率的原始图像,平均误差可降低40%至80%。该研究还量化了所有三个质量运动示例的平均误差,随机误差,失配比例和未检测到的运动比例如何随像素大小增加(即空间分辨率降低)而增加。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号