首页> 外文期刊>Neurosurgery >Cable-Strengthened C2 Pedicle Screw Fixation in the Treatment of Congenital C2-3 Fusion, Atlas Occipitalization, and Atlantoaxial Dislocation
【24h】

Cable-Strengthened C2 Pedicle Screw Fixation in the Treatment of Congenital C2-3 Fusion, Atlas Occipitalization, and Atlantoaxial Dislocation

机译:电缆加固的C2椎弓根螺钉固定术治疗先天性C2-3融合,寰椎枕骨化和寰枢椎脱位

获取原文
获取原文并翻译 | 示例
           

摘要

BACKGROUND: Atlas occipitalization and congenital C2-3 fusion often result in atlantoaxial dislocation (AAD) and superior odontoid migration that requires occipito-cervical fixation. The widely used technique is posterior occiput-C2 fixation with pedicle screws. However, congenital C2-3 fusion cases tend to have thinner C2 pedicles that are inadequate for normal-sized pedicle screw fixation. With the presence of AAD, the strength of the fixation is further compromised as the C2 pedicle screws (C2PS) sustain considerable cephalic shearing force during the reduction procedure. Therefore, a novel technique has been developed to augment the C2 pedicle screw fixation with a strengthening cable.OBJECTIVE: To introduce and assess this new technique.METHODS: Seventy-six patients who underwent this procedure were reviewed. The position of the instrument and resultant fusion were examined retrospectively. In the biomechanical test, 6 fresh specimens were subjected to 2 types of fixation in the order of Oc-C2 screw-plate fixation followed by additional use of strengthening cable. Under 3 loading modes (extension-flexion, lateral bending, and axial rotation), the relative movement between the occiput and C2 was measured and compared in the form of range of motion.RESULTS: The average follow-up time was 26 months. Solid fusion was achieved in 75 patients (98.7%) as assessed radiologically. The only patient who experienced hardware failure eventually obtained solid fusion between the occiput and C2 after revision. Biomechanically, there was significant difference between the occiput and C2 fixation and cable-strengthened fixation in range of motion for all modes. CONCLUSION: This technique is a promising option for the treatment of AAD with congenital C2-3 fusion and occipitalization. Biomechanically, this technique can reduce the occipital-axial motion significantly compared with occiput-C2 fixation.
机译:背景:Atlas枕骨化和先天性C2-3融合通常会导致寰枢椎脱位(AAD)和上颌齿状突突的迁移,需要枕颈固定。广泛使用的技术是用椎弓根螺钉固定后枕C2。但是,先天性C2-3融合病例倾向于具有较薄的C2椎弓根,不足以进行正常大小的椎弓根螺钉固定。随着AAD的存在,由于C2椎弓根螺钉(C2PS)在复位过程中承受相当大的头部剪切力,因此固定强度进一步受到损害。因此,已开发出一种新技术来通过加强缆线来增强C2椎弓根螺钉的固定。目的:引入并评估该新技术。方法:回顾了76例接受该手术的患者。仪器的位置和所产生的融合进行了回顾性检查。在生物力学测试中,按照Oc-C2螺钉-板固定的顺序,对6个新鲜标本进行了2种固定方式,然后另外使用加强电缆。在3种负荷模式(伸展屈曲,横向弯曲和轴向旋转)下,测量枕骨和C2之间的相对运动,并以运动范围的形式进行比较。结果:平均随访时间为26个月。经放射学评估,有75例患者(98.7%)实现了牢固融合。修复后,唯一经历硬件故障的患者最终在枕骨和C2之间获得了牢固的融合。生物力学上,在所有模式下,枕骨和C2固定与线缆加强固定之间的活动范围存在显着差异。结论:该技术是先天性C2-3融合和枕骨化治疗AAD的一种有前途的选择。在生物力学上,与枕骨C2固定相比,该技术可以显着减少枕骨轴向运动。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号