首页> 外文期刊>Neurosurgery >Cable-Strengthened C2 Pedicle Screw Fixation in the Treatment of Congenital C2-3 Fusion, Atlas Occipitalization, and Atlantoaxial Dislocation
【24h】

Cable-Strengthened C2 Pedicle Screw Fixation in the Treatment of Congenital C2-3 Fusion, Atlas Occipitalization, and Atlantoaxial Dislocation

机译:电缆加强C2椎弓根螺钉固定治疗先天性C2-3融合,阿特拉斯官员和寰枢复脱位

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

BACKGROUND: Atlas occipitalization and congenital C2-3 fusion often result in atlantoaxial dislocation (AAD) and superior odontoid migration that requires occipito-cervical fixation. The widely used technique is posterior occiput-C2 fixation with pedicle screws. However, congenital C2-3 fusion cases tend to have thinner C2 pedicles that are inadequate for normal-sized pedicle screw fixation. With the presence of AAD, the strength of the fixation is further compromised as the C2 pedicle screws (C2PS) sustain considerable cephalic shearing force during the reduction procedure. Therefore, a novel technique has been developed to augment the C2 pedicle screw fixation with a strengthening cable.OBJECTIVE: To introduce and assess this new technique.METHODS: Seventy-six patients who underwent this procedure were reviewed. The position of the instrument and resultant fusion were examined retrospectively. In the biomechanical test, 6 fresh specimens were subjected to 2 types of fixation in the order of Oc-C2 screw-plate fixation followed by additional use of strengthening cable. Under 3 loading modes (extension-flexion, lateral bending, and axial rotation), the relative movement between the occiput and C2 was measured and compared in the form of range of motion.RESULTS: The average follow-up time was 26 months. Solid fusion was achieved in 75 patients (98.7%) as assessed radiologically. The only patient who experienced hardware failure eventually obtained solid fusion between the occiput and C2 after revision. Biomechanically, there was significant difference between the occiput and C2 fixation and cable-strengthened fixation in range of motion for all modes. CONCLUSION: This technique is a promising option for the treatment of AAD with congenital C2-3 fusion and occipitalization. Biomechanically, this technique can reduce the occipital-axial motion significantly compared with occiput-C2 fixation.
机译:背景:阿特拉斯官员和先天性C2-3融合通常导致寰枢椎脱位(AAD)和优异的Odondoid迁移,需要咽宫颈固定。广泛使用的技术是与椎弓根螺钉的后枕形 - C2固定。然而,先天性C2-3融合案件倾向于具有较薄的C2椎弓根,对于正常大小的椎弓根螺钉固定是不充分的。在存在AAD的情况下,固定的强度进一步受到C2椎弓根螺钉(C2PS)在减少过程中维持相当大的头部剪切力。因此,已经开发了一种新颖的技术来增加C2椎弓根螺钉固定用强化电缆。目的:引入和评估这种新技术。方法:综述了七十六名接受此程序的患者。回顾性地检查仪器和所得融合的位置。在生物力学试验中,按照OC-C2螺纹板固定的顺序进行6种类型的固定,然后额外使用强化电缆。在3个装载模式下(延伸屈曲,横向弯曲和轴向旋转),测量枕骨和C2之间的相对运动,并以运动范围的形式进行比较。结果:平均随访时间为26个月。在75名患者(98.7%)中达到固体融合,如放射性评估。唯一经历硬件故障的患者最终在修订后最终获得枕骨和C2之间的固体融合。生物力学,枕骨与C2固定与电缆加强固定在所有模式的运动范围内有显着差异。结论:该技术是用先天性C2-3融合和夜总会治疗AAD的有前途的选择。与枕-C2固定相比,这种技术可以显着降低枕骨轴运动。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号