Multiscale modelling of dislocation/grain-boundary interactions: I. Edge dislocations impinging on Sigma 11 (113) tilt boundary in Al

摘要

Dislocation and grain-boundary processes contribute significantly to plastic behaviour in polycrystalline metals, but a full understanding of the interaction between these processes and their influence on plastic response has yet to be achieved. The coupled atomistic discrete-dislocation method is used to study edge dislocation pile-ups interacting with a Sigma 11-[113] symmetric tilt boundary in Al at zero temperature under various loading conditions. Nucleation of grain-boundary dislocations (GBDs) at the dislocation/grain-boundary intersection is the dominant mechanism of deformation. Dislocation pile-ups modify both the stress state and the residual defects at the intersection, the latter due to multiple dislocation absorption into the boundary, and so change the local grain-boundary/dislocation interaction phenomena as compared with cases with a single dislocation. The deformation is irreversible upon unloading and reverse loading if multiple lattice dislocations absorb into the boundary and damage in the form of microvoids and loss of crystalline structure accumulates around the intersection. Based on these results, the criteria for dislocation transmission formulated by Lee, Robertson and Birnbaum are extended to include the influences of grain-boundary normal stress, shear stress on the leading pile-up dislocation and minimization of step height at the intersection. Two possible yield loci for the onset of GBD nucleation versus compressive stress and relevant shear stresses are derived from the simulations. These results, and similar studies on other boundaries and dislocation characters, guide the formulation of continuum constitutive behaviours for use in discrete-dislocation or strain-gradient plasticity modelling.