...
首页> 外文期刊>Medical Physics >A needle guidance system for biopsy and therapy using two-dimensional ultrasound.
【24h】

A needle guidance system for biopsy and therapy using two-dimensional ultrasound.

机译:一种使用二维超声进行活检和治疗的针头引导系统。

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Image-guided needle biopsies are currently used to provide a definitive diagnosis of breast cancer; however, difficulties in tumor targeting exist as the ultrasound (US) scan plane and biopsy needle must remain coplanar throughout the procedure to display the actual needle tip position. The additional time associated with aligning and maintaining this coplanar relationship results in increased patient discomfort. Biopsy procedural efficiency is further hindered since needle pathway interpretation is often difficult, especially for needle insertions at large depths that usually require multiple reinsertions. The authors developed a system that would increase the speed and accuracy of current breast biopsy procedures using readily available two-dimensional (2D) US technology. This system is composed of a passive articulated mechanical arm that attaches to a 2D US transducer. The arm is connected to a computer through custom electronics and software, which were developed as an interface for tracking the positioning of the mechanical components in real time. The arm couples to the biopsy needle and provides visual guidance for the physician performing the procedure in the form of a real-time projected needle pathway overlay on an US image of the breast. An agar test phantom, with stainless steel targets interspersed randomly throughout, was used to validate needle trajectory positioning accuracy. The biopsy needle was guided by both the software and hardware components to the targets. The phantom, with the needle inserted and device decoupled, was placed in an x-ray stereotactic mammography (SM) machine. The needle trajectory and bead target locations were determined in three dimensions from the SM images. Results indicated a mean needle trajectory accuracy error of 0.75 +/- 0.42 mm. This is adequate to sample lesions that are < 2 mm in diameter. Chicken tissue test phantoms were used to compare core needle biopsy procedure times between experienced radiologists and inexperienced resident radiologists using free-hand US and the needle guidance system. Cylindrical polyvinyl alcohol cryogel lesions, colored blue, were embedded in chicken tissue. Radiologists identified the lesions, visible as hypoechoic masses in the US images, and performed biopsy using a 14-gauge needle. Procedure times were compared based on experience and the technique performed. Using a pair-wise t test, lower biopsy procedure times were observed when using the guidance system versus the free-hand technique (t = 12.59, p < 0.001). The authors believe that with this improved biopsy guidance they will be able to reduce the "false negative" rate of biopsies, especially in the hands of less experienced physicians.
机译:图像引导的穿刺活检目前用于确定性诊断乳腺癌。但是,由于超声(US)扫描平面和活检针在整个过程中必须保持共面以显示实际的针尖位置,因此在肿瘤靶向方面存在困难。与对准和保持该共面关系相关的额外时间导致增加的患者不适感。活检程序的效率进一步受到阻碍,因为针通路的解释通常很困难,尤其是对于通常需要多次重新插入的较大深度的针插入。作者开发了一种系统,该系统将使用现成的二维(2D)美国技术提高当前乳房活检程序的速度和准确性。该系统由一个无源关节机械臂组成,该臂连接到2D US换能器。手臂通过定制的电子设备和软件连接到计算机,这些软件和软件被开发为用于实时跟踪机械部件定位的接口。手臂与活检针相连,并以实时投影的针头路径覆盖在乳房的US图像上的形式为医生执行手术提供视觉指导。琼脂测试体模与不锈钢靶始终随机散布,用于验证针头轨迹的定位精度。活检针由软件和硬件组件引导到目标。将已插入针头并断开设备耦合的体模放在X射线立体定向乳腺摄影(SM)机器中。从SM图像的三个维度确定针的轨迹和珠子目标位置。结果表明平均针轨迹精度误差为0.75 +/- 0.42 mm。这足以采样直径小于2毫米的病变。鸡组织测试体模被用来比较经验丰富的放射线医生和经验不足的驻地放射线医生使用徒手的US和针头引导系统进行核心针头活检过程的时间。圆柱形的聚乙烯醇冷冻凝胶病变(呈蓝色)被嵌入鸡组织中。放射科医生确定了病变,在美国影像中可见为低回声肿块,并使用14号针头进行了活检。根据经验和执行的技术比较了手术时间。使用成对t检验,与引导技术相比,使用引导系统的活检过程时间更短(t = 12.59,p <0.001)。作者认为,通过这种改进的活检指导,他们将能够减少活检的“假阴性”发生率,尤其是在经验不足的医师手中。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号