【24h】

Study of catheter designs and drug mixing processes using 2D steady numerical simulations.

机译:使用2D稳态数值模拟研究导管设计和药物混合过程。

获取原文
获取原文并翻译 | 示例
           

摘要

The effectiveness of substance delivery through catheters is an important issue in interventional radiology, especially for infusion therapies where the pharmacokinetic advantage of local intra-arterial drug administration has been firmly established. In principle, the procedure is used to provide appropriate local concentrations while maintaining low systemic values so as to minimise the global effect and toxicity of the intervention. However, poor drug mixing may produce excessive local concentrations potentially damaging for the surrounding tissues and may lead to unsuccessful therapies. These phenomena have been observed in the infusion therapies of liver cancers through the hepatic artery and with brain tumour therapies through the carotid artery. Many aspects of the drug delivery methodology have been explored in order to determine the infusion conditions that would provide optimal mixing: the catheter tip design is considered one of the most important characteristics to be investigated for this purpose. Interestingly, it turns out that angiographic procedures could also benefit from this, because better mixing properties are associated with designs that provide potentially less harmful flow conditions such as jets, whipping and recoil of the catheter on the vascular wall. A 2D steady numerical model is proposed, to simulate the main physical processes occurring during catheter substance infusion: blood dynamics is taken into account with the Navier-Stokes equations and substance dispersion by the flowing blood with the advection-diffusion equation. The model is used to evaluate mixing properties of certain catheter designs in different flow conditions. In particular, two types of side hole catheter are compared in the context of water bath injection and in the context of vessel injection. The simulations suggest that the improved mixing reported with water bath experiments would not be maintained in the clinical context of arterial circulation.
机译:通过导管输送物质的有效性在介入放射学中是一个重要的问题,尤其是对于已经牢固确立了局部动脉内给药的药代动力学优势的输注疗法。原则上,该程序用于提供适当的局部浓度,同时保持较低的全身值,以最大程度地降低干预措施的整体作用和毒性。但是,不良的药物混合可能会产生过多的局部浓度,从而可能损坏周围的组织,并可能导致治疗失败。在通过肝动脉的肝癌输注疗法和通过颈动脉的脑肿瘤疗法中已经观察到这些现象。为了确定可以提供最佳混合的输液条件,已经探索了药物输送方法的许多方面:导管尖端设计被认为是为此目的要研究的最重要的特征之一。有趣的是,事实证明,血管造影术也可以从中受益,因为更好的混合特性与设计提供了潜在的危害较小的流动条件,例如喷射,搅打和在血管壁上反冲的设计有关。提出了二维稳态数值模型,以模拟导管物质注入过程中发生的主要物理过程:Navier-Stokes方程考虑了血液动力学,而对流扩散方程则考虑了流动的血液对物质的扩散。该模型用于评估某些导管设计在不同流动条件下的混合特性。特别地,在水浴注射的情况下和在血管注射的情况下比较了两种类型的侧孔导管。模拟结果表明,在水循环实验中,水浴实验所报告的混合效果不会得到改善。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号