首页> 外文期刊>Canadian Journal of Physics >Development of plasma-enhanced chemical vapor deposition microcrystalline silicon oxide as a replacement for N-type or back transparent conducting oxide layers in amorphous silicon single-junction solar cells
【24h】

Development of plasma-enhanced chemical vapor deposition microcrystalline silicon oxide as a replacement for N-type or back transparent conducting oxide layers in amorphous silicon single-junction solar cells

机译:等离子体增强化学气相沉积微晶氧化硅的开发,以替代非晶硅单结太阳能电池中的N型或背面透明导电氧化物层

获取原文
获取原文并翻译 | 示例
           

摘要

The n-type hydrogenated microcrystalline silicon oxide (μc-SiO_x:H(n)) thin films with varied electrical and optical properties were prepared. We employed μc-SiO_x:H(n) as a replacement for n-type hydrogenated amorphous silicon (a-Si:H(n)) or back transparent conducting oxide (TCO) layers in hydrogenated amorphous silicon (a-Si:H) single-junction solar cells. Compared to the standard cell with a-Si:H(n)/ITO/Ag back reflecting structure, the cell using a-Si:H(n)/μc-SiO_x:H(n)/Ag or μc-SiO_x:H(n)/Ag showed a similar or even better performance. This improvement of cell performance mainly arose from the increased short-circuit current density (J_(SC)) that originated from the increased long wavelength (580-660 nm) absorption in the absorber confirmed by the quantum efficiency measurement. The "all plasma-enhanced chemical vapor deposition " (if the front TCO and metal contact are disregarded) process without TCO (indium tin oxide, ITO) sputtering can simplify the fabrication and result in better interface quality. Compared to the standard cell, the conversion efficiency of a-Si:H cells using an 80 nm thick μc-SiO_x:H(n)/Ag back reflecting structure was enhanced from 9.32% to 9.84%, with V_(OC) = 0.90 V, J_(SC) = 14.84 mA/cm~2, and FF = 73.7%.
机译:制备了具有不同电学和光学性质的n型氢化微晶硅氧化物(μc-SiO_x:H(n))薄膜。我们使用μc-SiO_x:H(n)替代n型氢化非晶硅(a-Si:H(n))或氢化非晶硅(a-Si:H)中的背面透明导电氧化物(TCO)层单结太阳能电池。与具有a-Si:H(n)/ ITO / Ag背反射结构的标准电池相比,使用a-Si:H(n)/μc-SiO_x:H(n)/ Ag或μc-SiO_x:H的电池(n)/ Ag表现出相似甚至更好的表现。电池性能的提高主要来自短路电流密度(J_(SC))的增加,该短路电流密度的增加是由量子效率测量结果证实的吸收体中较长波长(580-660 nm)吸收的增加所致。不使用TCO(铟锡氧化物,ITO)溅射的“所有等离子体增强的化学气相沉积”(如果不考虑正面TCO和金属接触)工艺可以简化制造过程,并提供更好的界面质量。与标准电池相比,使用80 nm厚μc-SiO_x:H(n)/ Ag背反射结构的a-Si:H电池的转换效率从9.32%提高到9.84%,V_(OC)= 0.90 V,J_(SC)= 14.84mA / cm〜2,FF = 73.7%。

著录项

相似文献

  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号