Studies on the properties and characteristics of starch-LDPE blend films using cross-linked, glycerol modified, cross-linked and glycerol modified starch

摘要

Corn starch was modified by cross-linking with epichlorohydrin and plasticizer glycerol. X-ray diffraction studies showed that relative crystallinity of the native and cross-linked starch were similar and were not affected by cross-linking. Different films were prepared by blending corn starch, cross-linked starch or glycerol modified starch in LDPE. The mechanical properties of the films were studied for tensile strength, elongation, melt flow index, and burst strength. The properties of the blend films were compared with LDPE films. It was observed that with the blending of 7.5% native starch, there was a decrease in tensile strength, elongation and melt flow index but burst strength increased. The tensile strength, elongation and melt flow index of the films containing cross-linked starch was considerably higher than those containing native starch but the burst strength showed a reverse trend. For native starch and cross-linked starch modified with glycerol, the elongation and melt flow index of the films increased but burst strength decreased. Surface scanning of the blend films were done by scanning electron microscope. Film containing cross-linked starch/glycerol modified starch in the blend was observed to be smoother than the native starch blend films. (C) 2007 Elsevier Ltd. All rights reserved.