首页> 外文期刊>Investigative radiology >Augmented reality visualization using image overlay technology for mr-guided interventions: Cadaveric bone biopsy at 1.5 T
【24h】

Augmented reality visualization using image overlay technology for mr-guided interventions: Cadaveric bone biopsy at 1.5 T

机译:使用图像叠加技术进行增强现实可视化以进行MR引导的干预:1.5 T的尸体骨活检

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

PURPOSE: The purpose of this study was to prospectively test the hypothesis that image overlay technology facilitates accurate navigation for magnetic resonance (MR)-guided osseous biopsy. MATERIALS AND METHODS: A prototype augmented reality image overlay system was used in conjunction with a clinical 1.5-T MR imaging system. Osseous biopsy of a total of 16 lesions was planned in 4 human cadavers with osseous metastases. A loadable module of 3D Slicer open-source medical image analysis and visualization software was developed and used for display of MR images, lesion identification, planning of virtual biopsy paths, and navigation of drill placement. The osseous drill biopsy was performed by maneuvering the drill along the displayed MR image containing the virtual biopsy path into the target. The drill placement and the final drill position were monitored by intermittent MR imaging. Outcome variables included successful drill placement, number of intermittent MR imaging control steps, target error, number of performed passes and tissue sampling, time requirements, and pathological analysis of the obtained osseous core specimens including adequacy of specimens, presence of tumor cells, and degree of necrosis. RESULTS: A total of 16 osseous lesions were sampled with percutaneous osseous drill biopsy. Eight lesions were located in the osseous pelvis (8/16, 50%) and 8 (8/16, 50%) lesions were located in the thoracic and lumbar spine. Lesion size was 2.2 cm (1.1-3.5 cm). Four (2-8) MR imaging control steps were required. MR imaging demonstrated successful drill placement inside 16 of the 16 target lesions (100%). One needle pass was sufficient for accurate targeting of all lesions. One tissue sample was obtained in 8 of the 16 lesions (50%); 2, in 6 of the16 lesions (38%); and 3, in 2 of the 16 lesions (12%). The target error was 4.3 mm (0.8-6.8 mm). Length of time required for biopsy of a single lesion was 38 minutes (20-55 minutes). Specimens of 15 of the 16 lesions (94%) were sufficient for pathological evaluation. Of those 15 diagnostic specimens, 14 (93%) contained neoplastic cells, whereas 1 (7%) specimen demonstrated bone marrow without evidence of neoplastic cells. Of those 14 diagnostic specimens, 11 (79%) were diagnostic for carcinoma or adenocarcinoma, which was concordant with the primary neoplasm, whereas, in 3 of the 14 diagnostic specimens (21%), the neoplastic cells were indeterminate. CONCLUSIONS: Image overlay technology provided accurate navigation for the MR-guided biopsy of osseous lesions of the spine and the pelvis in human cadavers at 1.5 T. The high technical and diagnostic yield supports further evaluation with clinical trials.
机译:目的:本研究的目的是前瞻性地检验以下假设:图像叠加技术有助于磁共振(MR)引导的骨质活检的准确导航。材料与方法:原型增强现实图像叠加系统与临床1.5 T MR成像系统结合使用。计划对4具骨转移的尸体进行16处病变的骨活检。开发了可加载模块的3D Slicer开源医学图像分析和可视化软件,并将其用于MR图像的显示,病变识别,虚拟活检路径的规划以及钻头放置的导航。通过沿包含显示的虚拟活检路径进入目标的MR图像操纵钻头来进行骨钻活检。钻头的位置和最终钻头的位置通过间歇性MR成像进行监控。结果变量包括成功放置钻头,间歇性MR成像控制步骤数,目标误差,已执行的通过次数和组织采样数,时间要求以及所获得的骨性骨标本的病理分析,包括标本的充分性,肿瘤细胞的存在和程度坏死。结果:经皮穿刺骨穿刺活检共取样16个骨性病变。骨盆骨中有8个病变(8 / 16,50%),胸椎和腰椎中有8个(8 / 16,50%)病变。病变大小为2.2厘米(1.1-3.5厘米)。需要四个(2-8)MR成像控制步骤。 MR成像显示成功将钻头放置在16个目标病变中的16个(100%)内。一针通过就足以准确靶向所有病变。在16个病变中的8个(50%)中获得了一个组织样本。 2、16个病灶中的6个(38%); 16个病变中有2个(3%)(12%)。目标误差为4.3毫米(0.8-6.8毫米)。对单个病变进行活检所需的时间为38分钟(20-55分钟)。 16个病变中有15个的标本(94%)足以进行病理评估。在这15个诊断标本中,有14个(93%)包含赘生性细胞,而1个(7%)标本显示出骨髓而没有赘生性细胞的迹象。在这14个诊断标本中,有11个(79%)诊断出与原发性肿瘤一致的癌或腺癌,而在14个诊断标本中的3个(21%)中,肿瘤细胞是不确定的。结论:图像叠加技术为MR引导下的人体尸体的脊骨和骨盆骨病变的MR引导活检在1.5 T下提供了准确的导航。较高的技术和诊断产率支持临床试验的进一步评估。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号