首页> 外文期刊>International Orthopaedics >Accuracy of acetabular cup placement in computer-assisted, minimally-invasive THR in a lateral decubitus position.
【24h】

Accuracy of acetabular cup placement in computer-assisted, minimally-invasive THR in a lateral decubitus position.

机译:髋臼杯在计算机辅助微创THR中放置在侧卧位时的准确性。

获取原文
获取原文并翻译 | 示例
       

摘要

In a prospective and randomised clinical study, we implanted acetabular cups either by means of an image-free computer-navigation system (navigated group, n = 32) or by free-hand technique (freehand group n = 32, two drop-outs). Total hip replacement was conducted in the lateral position and through a minimally invasive anterior approach (MicroHip). The position of the component was determined postoperatively on CT scans of the pelvis using CT-planning software. We found an average inclination of 42.3 degrees (range 32.7-50.6 degrees ; SD +/- 3.8 degrees ) and an average anteversion of 24.5 degrees (range 12.0-33.3 degrees ; SD +/- 6.0 degrees ) in the computer-assisted study group and an average inclination of 37.9 degrees (range 25.6-50.2 degrees ; SD +/- 6.3 degrees ) and an average anteversion of 23.8 degrees (range 5.6-46.9 degrees ; SD +/- 10.1 degrees ) in the freehand group. The higher precision of computer navigation was indicated by the lower standard deviations. For both measurements we found a significant heterogeneity of variances (p < 0.05, Levene's test). The mean difference between the cup inclination/anteversion values displayed by computer navigation and the true cup position (CT control) was 0.37 degrees (SD 3.26) and -5.61 degrees (SD 6.48), respectively. We found a bias (underestimation) with regard to anteversion determined by the imageless computer navigation system. A bias for inclination was not found. Registration of the landmarks of the anterior pelvic plane in lateral position with undraped percutaneous methods leads to an error in cup anteversion, but not to an error in cup inclination. The bias we found is consistent with a correct registration of the anterosuperior iliac spine (ASIS) and with a registration of the symphysis 1 cm above the bone, corresponding to the less compressible overlying soft tissue in this region. There was no significant correlation between the bias and the thickness of soft tissue above the pubic tubercles. We suggest use of a percutaneous registration of ASIS and an invasive registration above the pubic tubercles when computer-assisted navigation is performed in minimally invasive THR in a lateral position.
机译:在一项前瞻性和随机临床研究中,我们通过无图像计算机导航系统(导航组,n = 32)或徒手技术(徒手组n = 32,两个退出者)植入髋臼杯。 。全髋关节置换术是在侧位并通过微创前路入路(MicroHip)进行的。术后使用骨盆CT扫描软件在骨盆的CT扫描上确定组件的位置。在计算机辅助研究小组中,我们发现平均倾斜度为42.3度(范围32.7-50.6度; SD +/- 3.8度)和平均前倾度为24.5度(范围12.0-33.3度; SD +/- 6.0度)写意组的平均倾斜度为37.9度(范围25.6-50.2度; SD +/- 6.3度)和平均前倾度为23.8度(范围5.6-46.9度; SD +/- 10.1度)。较低的标准偏差表示计算机导航的精度较高。对于这两种测量,我们发现方差均具有显着异质性(p <0.05,Levene检验)。通过计算机导航显示的杯子倾斜度/前倾值与真实杯子位置(CT控制)之间的平均差分别为0.37度(SD 3.26)和-5.61度(SD 6.48)。我们发现由无图像计算机导航系统确定的关于偏航的偏见(低估)。没有发现倾斜的偏差。使用未披覆的经皮方法将前骨盆平面的界标在横向位置配准会导致杯前倾误差,但不会导致杯倾角误差。我们发现的偏差与上with骨脊柱(ASIS)的正确配准以及与骨上方1 cm的共骨的配准相一致,这对应于该区域中较难压缩的上覆软组织。耻骨结节上方的软组织厚度与斜度之间没有显着相关性。当计算机辅助导航以微创THR在横向位置进行时,我们建议使用ASIS的经皮定位和耻骨结节上方的侵入式定位。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号