首页> 美国卫生研究院文献>International Orthopaedics >Accuracy of acetabular cup placement in computer-assisted minimally-invasive THR in a lateral decubitus position
【2h】

Accuracy of acetabular cup placement in computer-assisted minimally-invasive THR in a lateral decubitus position

机译:髋臼杯在计算机辅助微创THR中放置在侧卧位的准确性

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

In a prospective and randomised clinical study, we implanted acetabular cups either by means of an image-free computer-navigation system (navigated group, n = 32) or by free-hand technique (freehand group n = 32, two drop-outs). Total hip replacement was conducted in the lateral position and through a minimally invasive anterior approach (MicroHip). The position of the component was determined postoperatively on CT scans of the pelvis using CT-planning software. We found an average inclination of 42.3° (range 32.7–50.6°; SD±3.8°) and an average anteversion of 24.5° (range 12.0–33.3°; SD±6.0°) in the computer-assisted study group and an average inclination of 37.9° (range 25.6–50.2°; SD±6.3°) and an average anteversion of 23.8° (range 5.6–46.9°; SD±10.1°) in the freehand group. The higher precision of computer navigation was indicated by the lower standard deviations. For both measurements we found a significant heterogeneity of variances (p < 0.05, Levene's test). The mean difference between the cup inclination/anteversion values displayed by computer navigation and the true cup position (CT control) was 0.37° (SD 3.26) and −5.61° (SD 6.48), respectively. We found a bias (underestimation) with regard to anteversion determined by the imageless computer navigation system. A bias for inclination was not found. Registration of the landmarks of the anterior pelvic plane in lateral position with undraped percutaneous methods leads to an error in cup anteversion, but not to an error in cup inclination. The bias we found is consistent with a correct registration of the anterosuperior iliac spine (ASIS) and with a registration of the symphysis 1 cm above the bone, corresponding to the less compressible overlying soft tissue in this region. There was no significant correlation between the bias and the thickness of soft tissue above the pubic tubercles. We suggest use of a percutaneous registration of ASIS and an invasive registration above the pubic tubercles when computer-assisted navigation is performed in minimally invasive THR in a lateral position.
机译:在一项前瞻性和随机临床研究中,我们通过无图像计算机导航系统(导航组,n = 32)或徒手技术(徒手组n = 32,两个退出者)植入髋臼杯。 。全髋关节置换术是在侧位并通过微创前路入路(MicroHip)进行的。术后使用CT计划软件在骨盆的CT扫描中确定组件的位置。我们在计算机辅助研究组中发现平均倾斜度为42.3°(范围为32.7-50.6°; SD±3.8°),平均前倾角为24.5°(范围为12.0-33.3°; SD±6.0°),并且平均倾斜度为徒手编组中,其前倾角为37.9°(范围25.6-50.2°; SD±6.3°),平均前倾角为23.8°(范围5.6-46.9°; SD±10.1°)。较低的标准偏差表示计算机导航的精度较高。对于这两种测量,我们发现方差具有显着的异质性(peven <0.05,Levene检验)。通过计算机导航显示的杯子倾斜度/前倾值与真实杯子位置(CT控制)之间的平均差分别为0.37°(SD 3.26)和-5.61°(SD 6.48)。我们发现由无图像计算机导航系统确定的关于偏航的偏见(低估)。没有发现倾斜的偏见。使用未披覆的经皮方法将前骨盆平面的界标在横向位置配准会导致杯前倾误差,但不会导致杯倾角误差。我们发现的偏斜与上骨脊柱(ASIS)的正确配准以及在骨上方1 cm的共骨的配准相一致,对应于该区域中较难压缩的上覆软组织。耻骨结节上方的软组织厚度与斜度之间没有显着相关性。我们建议使用计算机辅助导航在侧向位置的微创THR中进行ASIS的经皮配准和耻骨结节上方的侵入性配准。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号