...
首页> 外文期刊>Australian Journal of Chemistry: A Journal for the Publication of Original Research in All Branches of Chemistry >Supramolecular BioNanocomposites: Grafting of Biobased Polylactide to Carbon Nanoparticle Surfaces
【24h】

Supramolecular BioNanocomposites: Grafting of Biobased Polylactide to Carbon Nanoparticle Surfaces

机译:超分子生物纳米复合材料:生物基聚乳酸接枝到碳纳米粒子表面。

获取原文
获取原文并翻译 | 示例

摘要

Novel carbon nanostructures are attracting increasing interest and the combination of graphitic substrates with grafted biodegradable polymers may ultimately be of interest in a variety of biomedical and sensing applications. Here, a novel graphitic nanosubstrate, carbon nanospheres derived from cellulose, is functionalized with polylactides (PLA) using an established thionyl chloride intermediate scheme; the resulting supramolecular bionanocomposite is 97% from renewable resources. In addition, a direct 'grafting from' approach is utilized to grow polylactide chains on multi-walled carbon nanotubes (MWCNT). In the latter case, unlike previous approaches, the ring-opening polymerization is initiated directly from a hydroxyl bearing surface. Verification of the covalent attachment and characterization of the grafted layer are accomplished via a variety of techniques and methods. Even after repeated washing, thermal gravimetric analysis clearly shows the presence of a grafted layer, which decomposes at approximately 300° C, a value characteristic of PLA; it is found that 20 mg m~(-2) of PLA is grafted to the MWCNT and 3.9 mg m~(-2) of PLA is grafted to the carbon nanospheres. Solubility tests clearly show the graphitic structures have been fundamentally altered in their physiochemical properties; they become highly soluble in chloroform after the grafting reaction is complete. Transmission electron microscopy provides evidence of a 2-3 nm thick polymer layer. Finally, Fourier transform infrared spectroscopy shows several characteristic peaks of PLA including the ester group at 1760 cm~(-1).
机译:新型碳纳米结构吸引了越来越多的兴趣,并且石墨基质与接枝的可生物降解聚合物的组合最终可能在各种生物医学和传感应用中引起人们的兴趣。在这里,一种新型的石墨纳米基质,即衍生自纤维素的碳纳米球,使用已建立的亚硫酰氯中间体方案,用聚丙交酯(PLA)官能化;最终的超分子生物纳米复合材料来自可再生资源,占97%。另外,直接的“接枝自”方法用于在多壁碳纳米管(MWCNT)上生长聚丙交酯链。在后一种情况下,与以前的方法不同,开环聚合直接从含羟基的表面引发。通过多种技术和方法可以完成对共价连接和嫁接层特征的验证。即使经过反复洗涤,热重分析也清楚地显示了接枝层的存在,该接枝层在约300°C时分解,这是PLA的特征值。发现将20 mg m〜(-2)的PLA接枝到MWCNT上,并将3.9 mg m〜(-2)的PLA接枝到碳纳米球上。溶解度测试清楚地表明,石墨结构的理化性质已发生根本性改变。接枝反应完成后,它们变得高度溶于氯仿。透射电子显微镜提供了2-3nm厚的聚合物层的证据。最后,傅立叶变换红外光谱在1760 cm〜(-1)处显示了包括酯基在内的PLA的几个特征峰。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号