...
首页> 外文期刊>Applied thermal engineering: Design, processes, equipment, economics >Technical feasibility study of passive and active cooling for concentrator PV in harsh environment
【24h】

Technical feasibility study of passive and active cooling for concentrator PV in harsh environment

机译:恶劣环境下聚光光伏的被动和主动冷却技术可行性研究

获取原文
获取原文并翻译 | 示例
           

摘要

Concentrator PV (CPV) has the potential to replace the expensive PV material with cheaper optical elements which also enhance the overall electrical output. The triple junction III-V solar cells are integrated with CPV systems as they are more efficient, have a better response to high concentration, and lower temperature coefficient. However, using high solar concentration ratios will increase the solar cell surface temperature which is inversely proportional to the PV electrical efficiency. This work investigates the feasibility of passive and active cooling to maintain a single triple junction PV cell surface temperature and electrical performance under high solar concentration in the harsh environment like Saudi Arabia where ambient temperature can reach up to 50 degrees C in summertime. To study the feasibility of passive cooling in such an environment, CPV thermal simulation is undertaken to examine the performance of two heat sink designs, namely, Round Pin Heat Sink (RPHS) and Straight Fins Heat Sink (SFHS) under different ambient temperatures. The simulation reveals that passive cooling using those two heat sinks with concentration ratio of 500x is insufficient to maintain a single PV surface temperature below the operational limit set by the manufacturer, i.e. 80 degrees C, especially at high ambient temperatures which may degrade the life of the solar cell. On the other hand, 0.01 m/s water active cooling simulation results prove its ability to maintain the solar cell surface temperature around 60 degrees C and electrical efficiency at 39.5% regardless of the ambient temperature. Also, the outlet water average temperature for a single and multiple CPVs were examined and results show that placing 14 single CPVs above the cooling channel will raise the temperature to 90 degrees C which makes the coupling to a single stage absorption heat pump for cooling demand applicable. (C) 2016 Elsevier Ltd. All rights reserved.
机译:聚光器PV(CPV)有潜力用便宜的光学元件代替昂贵的PV材料,这也可以提高整体电输出。三结III-V太阳能电池与CPV系统集成在一起,因为它们效率更高,对高浓度的响应更好,温度系数更低。然而,使用高的太阳能集中度比率将增加太阳能电池表面温度,该温度与PV电效率成反比。这项工作研究了在恶劣的环境(例如沙特阿拉伯,夏季环境温度在夏季最高可达到50摄氏度)下,在高太阳光集中下被动和主动冷却以维持单个三结光伏电池表面温度和电性能的可行性。为了研究在这种环境下进行被动冷却的可行性,进行了CPV热仿真,以检验两种散热器设计的性能,即圆针散热器(RPHS)和直翅片散热器(SFHS)在不同环境温度下的性能。仿真表明,使用这两个散热片(浓度比为500x)进行被动冷却不足以将单个PV表面温度保持在制造商设定的运行极限(即80摄氏度)以下,特别是在较高的环境温度下,这可能会降低其使用寿命。太阳能电池。另一方面,0.01 m / s的水主动冷却模拟结果证明了无论环境温度如何,它都能将太阳能电池表面温度保持在60摄氏度左右,电效率保持在39.5%。此外,检查了单个和多个CPV的出水平均温度,结果表明,在冷却通道上方放置14个单个CPV会将温度提高到90摄氏度,这使得耦合到单级吸收式热泵可以满足冷却需求。 (C)2016 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号