...
首页> 外文期刊>Applied thermal engineering: Design, processes, equipment, economics >Numerical study on the transient behavior of water-entry supercavitating flow around a cylindrical projectile influenced by turbulent drag-reducing additives
【24h】

Numerical study on the transient behavior of water-entry supercavitating flow around a cylindrical projectile influenced by turbulent drag-reducing additives

机译:湍流减阻剂作用下圆柱状弹丸入水超空流瞬态行为的数值研究

获取原文
获取原文并翻译 | 示例
           

摘要

Simulation of the unsteady behavior of water-entry supercavitating flows influenced by turbulent drag reducing additives is very complicated. This paper attempts to introduce a numerical simulation procedure to simulate such problems in viscous incompressible two-phase and three-phase media, respectively. Firstly we performed a numerical investigation on water-entry supercavities in water and turbulent drag-reducing solution, respectively, at an impact velocity of 28.4 m/s to confirm the accuracy of the numerical method. Based on the verification, projectile entering water and turbulent drag-reducing solution at relatively high velocity of 142.7 m/s (phase transition is considered) is simulated. The Cross viscosity equation was adopted to represent the shear-thinning characteristic of aqueous solution of drag-reducing additives. The configuration and dynamic characteristics of water-entry supercavity, flow resistance and the radial velocity of cavity boundary were discussed respectively. It was obtained that the numerical simulation results are in consistence with experimental data, verifying the established numerical procedures. Numerical results show that the supercavity length in drag-reducing solution is larger than that in water; the velocity attenuates faster at high impact velocity than at low impact velocity. Turbulent drag-reducing additives have the potential in enhancement of supercavitation and further drag reduction. (C) 2016 Elsevier Ltd. All rights reserved.
机译:受湍流减阻添加剂影响的水进入超空化流的非稳态行为的模拟非常复杂。本文尝试介绍一种数值模拟程序,分别模拟粘性不可压缩的两相和三相介质中的此类问题。首先,我们对冲击力为28.4 m / s的水和湍流减阻溶液中的水进入超腔分别进行了数值研究,以确认该数值方法的准确性。在验证的基础上,模拟了射弹进入水中和以142.7 m / s的较高速度(考虑了相变)的湍流减阻解决方案。采用十字粘度方程来表示减阻添加剂水溶液的剪切稀化特性。分别讨论了水进入超腔的结构和动力学特性,流阻和腔边界的径向速度。结果表明,数值模拟结果与实验数据吻合,验证了所建立的数值程序。数值结果表明,减阻溶液的超腔长度大于水中的超腔长度。高冲击速度下的速度衰减快于低冲击速度下的速度衰减。湍流减阻添加剂具有增强超空化和进一步减阻的潜力。 (C)2016 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号