首页> 外文期刊>ACS applied materials & interfaces >Annealing Induced Morphology of Silver Nanoparticles on Pyramidal Silicon Surface and Their Application to Surface-Enhanced Raman Scattering
【24h】

Annealing Induced Morphology of Silver Nanoparticles on Pyramidal Silicon Surface and Their Application to Surface-Enhanced Raman Scattering

机译:退火诱导金字塔硅表面上的银纳米粒子的形态及其在表面增强拉曼散射的应用

获取原文
获取原文并翻译 | 示例
           

摘要

This paper reports on a simple and cost-effective process of developing a stable surface-enhanced Raman scattering (SERS) substrate based on silver (Ag) nanoparticles deposited on silicon (Si) surface. Durability is an important issue for preparing SERS active substrate as silver nanostructures are prone to rapid surface oxidation when exposed to ambient conditions, which may result in the loss of the enhancement capabilities in a short period of time. Here, we employ the galvanic displacement method to produce Ag nanoparticles on Si(100) substrate prepatterned with arrays of micropyramids by chemical etching, and subsequently, separate pieces of such substrates were annealed in oxygen and nitrogen environments at 550 degrees C. Interestingly, while nitrogen-annealed Si substrates were featured by spherical-shaped Ag particles, the oxygen annealed Si substrates were dominated by the formation of triangular shape particles attached with the spherical one. Remarkably, the oxygen-annealed substrate thus produced shows very high SERS enhancement compared to the either unannealed or nitrogen annealed substrate. The hitherto unobserved coexistence of triangular morphology with the spherical one and the gap between the two (source of efficient hot-spots) are the origin of enhanced SERS activity for the oxygen-annealed Ag particle-covered Si substrate as probed by the combined finite-difference time domain (FDTD) simulation and cathodoluminesensce (CL) experiment. As the substrate has already been annealed in an oxygen environment, further probability of oxidation is reduced in the present synthesis protocol that paves the way for making a novel long-lived thermally stable SERS substrate.
机译:本文报道了一种简单且经济效益的过程,即基于沉积在硅(Si)表面上的银(Ag)纳米颗粒的稳定表面增强拉曼散射(SERS)基材进行了简单且经济效益的过程。耐久性是制备SERS活性衬底的重要问题,因为在暴露于环境条件时,银纳米结构易于快速表面氧化,这可能导致在短时间内损失增强能力。在这里,我们采用电流位移方法通过化学蚀刻在微杂氮阵列上制备Ag纳米颗粒,然后通过化学蚀刻,在氧气和氮环境中,在550摄氏度下,在氧气和氮气环境中,在550摄氏度下,将单独的这种基材进行退火。通过球形Ag颗粒特征,氧气退火的Si基质由球形退火的Si底物以与球形的三角形颗粒的形成为主导。值得注意的是,与未经发烧或氮源退火的基材相比,如此制备的氧气退火的基材显示出非常高的SERs增强。迄今为止与球形的三角形形态的共存和两者之间的间隙(有效热点源)是氧气退火颗粒覆盖的Si衬底的增强SERs活性的起源,如组合的有限 - 差分时域(FDTD)模拟和阴极肿瘤瘤(CL)实验。当基材已经在氧环境中退火时,在本合成方案中,氧化的进一步概率降低,该合成方案铺平了制造新型长寿的热稳定SERS基板的方式。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号