...
首页> 外文期刊>ACS applied materials & interfaces >Nonequilibrium Catalyst Materials Stabilized by the Aerogel Effect: Solvent Free and Continuous Synthesis of Gamma-Alumina with Hierarchical Porosity
【24h】

Nonequilibrium Catalyst Materials Stabilized by the Aerogel Effect: Solvent Free and Continuous Synthesis of Gamma-Alumina with Hierarchical Porosity

机译:通过气凝胶效应稳定的非纤维催化剂材料:溶剂和连续合成具有等级孔隙率的γ-氧化铝

获取原文
获取原文并翻译 | 示例
           

摘要

Heterogeneous catalysis can be understood as a phenomenon which strongly relies on the occurrence of thermodynamically less favorable surface motifs like defects or high-energy planes. Because it is very difficult to control such parameters, an interesting approach is to explore metastable polymorphs of the respective solids. The latter is not an easy task as well because the emergence of polymorphs is dictated by kinetic control and materials with high surface area are required. Further, an inherent problem is that high temperatures required for many catalytic reactions can also induce the transformation to the thermodynamically stable modification. Alumina (Al2O3) was selected for the current study as it exists not only in the stable a-form but also as the metastable gamma-polymorph. Kinetic control was realized by combining an aerosol-based synthesis approach and a highly reactive, volatile precursor (AlMe3). Monolithic flakes of Al2O3 with a highly porous, hierarchical structure (micro-, meso-, and macropores connected to each other) resemble so-called aerogels, which are normally known only from wet solgel routes. Monolothic aerogel flakes can be separated from the gas phase without supercritical drying, which in principle allows for a continuous preparation of the materials. Process parameters can be adjusted so the material is composed exclusively of the desired gamma-modification. The gamma-Al2O3 aerogels were much more stable than they should be, and even after extended (80 h) high-temperature (1200 degrees C) treatment only an insignificant part has converted to the thermodynamically stable a-phase. The latter phenomenon was assigned to the extraordinary thermal insulation properties of aerogels. Finally, the material was tested concerning the catalytic dehydration of 1-hexanol. Comparison to other Al2O3 materials with the same surface area demonstrates that the gamma-Al2O3 are superior in activity and selectivity regarding the formation of the desired product 1-hexene.
机译:异质催化可以被理解为强烈依赖于热力学上不利的表面图案的发生的现象,如缺陷或高能量平面。因为非常难以控制这些参数,所以有趣的方法是探索各个固体的亚稳态多晶型物。后者并不是一件容易的任务,因为多晶型物的出现被动力控制和具有高表面积的材料所指定的。此外,固有的问题是许多催化反应所需的高温也可以诱导转化对热力学稳定的改性。选择氧化铝(Al2O3),用于目前的研究,因为它不仅存在于稳定的A形,而且作为亚稳态γ-多晶型物存在。通过组合气溶胶基合成方法和高反应性,挥发性前体(ALME3)来实现动力控制。 Al2O3的整体薄片具有高度多孔的等级结构(微型,中间,彼此连接的Macropores)类似于所谓的气凝胶,其通常仅从湿刚素途径中已知。单声道气凝胶薄片可以与气相分离而不超临界干燥,原则上允许连续制备材料。工艺参数可以调整,因此材料专门由所需的伽马修改组成。 γ-Al2O3气凝胶比应稳定,甚至在延长(80小时)高温(1200摄氏度)处理后,只有微不足道的部分转化为热力学稳定的A相。后一种现象被分配到Aerogels的非凡的绝热性能。最后,测试了催化脱水的1-己醇的材料。与具有相同表面积的其他Al2O3材料的比较表明,γ-Al2O3在活性和关于所需产物1-己烯的形成的选择性方面优异。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号