首页> 外文期刊>Chemical engineering journal >Synthesis and characterization of highly selective and sensitive Sn/SnO2/Ndoped carbon nanocomposite (Sn/SnO2@NGC) for sensing toxic NH3 gas
【24h】

Synthesis and characterization of highly selective and sensitive Sn/SnO2/Ndoped carbon nanocomposite (Sn/SnO2@NGC) for sensing toxic NH3 gas

机译:用于感应毒性NH3气体高精度和敏感Sn / SnO2 / Ndoped碳纳米复合材料(Sn / SnO2 @ NGC)的合成与表征

获取原文
获取原文并翻译 | 示例
           

摘要

In the present study, a facial synthesis of Sn/SnO2 nanoparticles embedded in nitrogen doped carbon based nanocomposites has been disclosed which was used as a fast and high-performance NH3 gas sensor. The prepared nanocomposite was characterized by various analytical technique including FTIR, TGA/DTA, Raman, XRD, FESEM, TEM/HRTEM and XPS. The presence of both Sn and SnO2 nanoparticles in carbon matrix are supported by FTIR, Raman and XRD. The XRD analysis showed the tetragonal crystal phase of SnO2 nanoparticles, and the BET results revealed 148.9m(2) g(-1) surface area of the nanocomposite. Furthermore, SEM image showed that Sn and SnO2 nanoparticles were well dispersed in the nitrogen doped carbon matrix. The fabricated sensor was characterized against various concentration of NH3 and the results indicated that the prepared sensor showed excellent responses at 65 degrees C working temperature, with 300 ppm concentration of NH3 and the sensitivity was observed 172.70. Additionally, the fabricated sensor also showed quick response and the recovery time of 60 s and 55 s, respectively. The fabricated sensor with its quick response and recovery time, good repeatability, excellent selectivity, and slight humidity effects has the potential and could be used as NH3 sensor on industrial scale.
机译:在本研究中,已经公开了嵌入氮掺杂碳基纳米复合材料中的Sn / SnO2纳米颗粒的面部合成,其用作快速和高性能的NH3气体传感器。制备的纳米复合材料的特征在于,各种分析技术,包括FTIR,TGA / DTA,拉曼,XRD,FESEM,TEM / HRTEM和XPS。 SN和SnO2纳米颗粒在碳基质中的存在由FTIR,拉曼和XRD负载。 XRD分析显示SnO2纳米颗粒的四方晶相,并表明结果显示了纳米复合材料的148.9m(2 )g(-1)表面积。此外,SEM图像显示Sn和SnO2纳米颗粒很好地分散在氮掺杂碳基质中。制造的传感器的特征在于各种浓度的NH 3,结果表明,制备的传感器在65℃的工作温度下显示出优异的反应,具有300ppm的NH 3浓度,观察到敏感性172.70。另外,制造的传感器还分别显示出快速响应和60s和55秒的恢复时间。制造的传感器具有快速响应和恢复时间,良好的重复性,优异的选择性和轻微的湿度效应具有潜力,可用作工业规模的NH3传感器。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号