首页> 外文期刊>ACS applied materials & interfaces >Growth and Morphology of Sputtered Aluminum Thin Films on P3HT Surfaces
【24h】

Growth and Morphology of Sputtered Aluminum Thin Films on P3HT Surfaces

机译:P3HT表面溅射铝薄膜的生长和形貌

获取原文
获取原文并翻译 | 示例
       

摘要

Growth and morphology of an aluminum (Al) contact on a poly(3-hexylthiophene) (P3HT) thin film are investigated with X-ray methods and related to the interactions at the A1:P3HT interface. Grazing incidence small-angle scattering (GISAXS) is applied in situ during Al sputter deposition to monitor the growth of the layer. A growth mode is found, in which the polymer surface is wetted and rapidly covered with a continuous layer. This growth type results in a homogeneous film without voids and is explained by the strong chemical interaction between Al and P3HT, which suppresses the formation of three- dimensional cluster structures. A corresponding three stage growth model (surface bonding, agglomeration, and layer growth) is derived. X-ray reflectivity shows the penetration of Al atoms into the P3HT film during deposition and the presence of a 2 nm thick intermixing layer at the Al:P3HT interface.
机译:用X射线方法研究了聚(3-己基噻吩)(P3HT)薄膜上铝(Al)接触层的生长和形貌,并研究了与Al:P3HT界面处的相互作用有关。在铝溅射沉积过程中就地施加掠入射小角度散射(GISAXS),以监视该层的生长。发现一种生长模式,其中聚合物表面被润湿并迅速被连续层覆盖。这种生长类型导致形成没有空隙的均匀膜,这可以通过Al和P3HT之间的强化学相互作用来解释,这可以抑制三维簇结构的形成。推导了相应的三阶段生长模型(表面结合,团聚和层生长)。 X射线反射率显示沉积过程中Al原子渗透到P3HT膜中以及在Al:P3HT界面处存在2 nm厚的混合层。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号