The effect of aspect ratio on the aerodynamic forces and bending moment for a surface-mounted finite-height cylinder

摘要

Wind tunnel experiments were performed at Re = 6.5 x 10(4) to measure the mean drag and normal forces, mean bending moment, and vortex shedding frequency for surface-mounted finite-height cylinders. The cylinder aspect ratio was varied in small increments between AR = 0.5 and 11, and two different boundary layer thicknesses were used, delta/D = 0.6 and 1.9. Small increments in AR and use of a single Re helped clarify some AR effects for finite cylinders. The data allowed a more precise definition of the familiar critical aspect ratio to be set, based on the behaviour of the mean aerodynamic forces and the point of action of the mean drag force. A second change in behaviour of the aerodynamic forces with AR was also identified; this transition was related to changes in the vortex formation length, the development of the near-wake recirculation zone, and the influence of the two main near-wake vortex structures, with AR. The general effects of increasing delta/D are to lower the force and moment coefficients and Strouhal number, increase the critical AR, and increase the AR where the second transition occurs.