首页> 外文期刊>Journal of the Optical Society of America, B. Optical Physics >Taming parasitic thermal emission by Tamm plasmon polaritons for the mid-infrared
【24h】

Taming parasitic thermal emission by Tamm plasmon polaritons for the mid-infrared

机译:通过Tamm等离子极化子进行中红外线的寄生热排放

获取原文
获取原文并翻译 | 示例
           

摘要

We investigated the concept of a ID layered structure for resonant selective thermal emission by excitation Tamm plasmon polaritons (TPPs). The modeled and simulated TPP structures for the mid-IR spectral region yield a promising approach for integrated sensing applications. In particular, the TPP structure is composed of an aperiodic multilayer stack of dielectric layers (silicon and silica) on a planar metallic surface acting as a heater and thus emitter for thermal radiation. By varying the layer depths, this design is highly optimizable for individual specifications, such as for enhancing the thermal emittance near to unity around a target wavelength and achieving a resonance with high Q-factor. Here, for demonstration purposes we chose lambda = 4,26 mu m as the target emission wavelength (corresponding to a major CO2 absorption line). However, considering a larger spectral range within the mid-IR region, parasitic resonances emerge in a more or less unpredictable manner and lead to multiband emission. A transfer matrix approach and genetic algorithm (GA) optimization were used to identify feasible stack configurations and characterize the behavior of parasitic resonances. In order to analyze and control the emergence of parasitic emission, different parameters characterizing the stack-metal composition were set. In particular, we found that keeping constraints on the number of dielectric layers and their individual thicknesses allows effective control of parasitic emission while also facilitating modern microlayer fabrication processes. Even though those constraints can hamper the enhancement of the Q-factor at the target resonance, highly performant configurations and parameters for the TPP structures could be identified. Each configuration corresponds to a particular choice of substrate metals (Ag or W), number of layers, and individual layer thicknesses. The behavior of the target and the parasitic resonances was discussed by using concepts of topological ph
机译:我们调查了通过激发Tamm等离子极化子(TPP)来激发谐振选择性热发射的ID层状结构的概念。 MID-IR光谱区域的建模和模拟TPP结构产生了一种用于集成传感应用的有希望的方法。特别地,TPP结构由在用作加热器的平面金属表面上的非周期性多层叠层(硅和二氧化硅)组成,因此发射器用于热辐射。通过改变层深度,该设计对于各个规范非常可优化,例如用于增强围绕目标波长的统一附近的热膨胀,并实现高Q系数的共振。这里,为了证明目的,我们选择Lambda =4,26μm作为目标发射波长(对应于主要CO 2吸收线)。然而,考虑到中红外区域内的较大光谱范围,寄生谐振以或多或少不可预测的方式出现并导致多频带发射。转移矩阵方法和遗传算法(GA)优化用于识别可行的堆叠配置并表征寄生共振的行为。为了分析和控制寄生发射的出现,设定了表征堆叠金属组合物的不同参数。特别地,我们发现将限制保持在介电层的数量及其各个厚度允许有效地控制寄生发射,同时还促进现代微层制造工艺。尽管这些约束可以妨碍目标谐振在目标谐振中的增强,但是可以识别用于TPP结构的高度表现配置和参数。每个配置对应于特定选择的基板金属(AG或W),层数和各个层厚度。通过使用拓扑pH值的概念讨论了目标和寄生虫谐振的行为

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号